Ks0228 keyestudio EASY plug Digital Red LED Module

From Keyestudio Wiki
Jump to: navigation, search
Keyestudio EASY plug Digital Red LED Module


The LED light module has a shiny color, ideal for emitting red light. It can be easily connected to Arduino IO/Sensor shield.
Note: this module needs to be used together with EASY plug control board.You can also choose other LED modules to emit different light color like blue, green, yellow and white.


  • Interface: Easy plug
  • Sensor type: Digital
  • PH2.54 socket
  • Easy to use
  • Useful for light projects

Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

Sample Code

Copy and paste below code to Arduino IDE and upload.

int led =6;
void setup()
pinMode(led, OUTPUT);//Set Pin6 as output
void loop()
digitalWrite(led, HIGH);//Turn led on
digitalWrite(led, LOW);//Turn led off

What You Should See

The LED will flash on for two seconds, then off for two seconds. If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.


Download the PDF:

Buy from