KS0312 Keyestudio Breadboard Power Module+830-Hole Solderless Breadboard+65 Jumper Wires Package

From Keyestudio Wiki
Jump to: navigation, search

Keyestudio Breadboard Power Module+830-Hole Solderless Breadboard+65 Jumper Wires Package



This package includes a 830-hole breadboard , a keyestudio breadboard power module and breadboard jumper wire packed of 65. You can freely add other components on the breadboard to design your own circuit.
Keyestudio breadboard power module is compatible with 5V and 3.3V, suitable for MB102 breadboard. This module includes dual independent control, one can be powered by USB port to output the voltage constantly for DC 5V; Another one is to power with DC 6.5-12V, and output controlled by dial switch, respectively for DC5V and DC3.3V.



Keyestudio Breadboard Power Module:

  • Input Voltage:DC 6.5-12V or USB power
  • Output Voltage:3.3V、5V can be switching
  • Max Output Current:<700ma
  • Dual independent control, can be switched to 3.3V and 5V
  • Onboard comes with two groups of DC output contact pins, easy for external lead out to use.


Breadboard And Jumper Wires:
Here you can refer to the below figure on how to use the solderless breadboard and jumper wires.

  • Bare Full-Size Breadboard Dimensions:165*56*10mm
  • The breadboard has 2 split power buses, 10 columns, and 63 rows - with a total of 830 tie in points.
  • This board also has a self-adhesive on the back. The boards also have interlocking parts, so you can hook as many together as you’d like.



  • These are jumpers with male connectors on both ends.Use these to jumper from any female header on any board to any other female header.
  • These Multiple jumpers also can be easily plugged into the breadboard. Comes as one pack of 65 jumpers with an assortment of colors.



Get One Now

If you want to purchase this package, you can clink on the link below:

Official Website:

Shop On AliExpress: [1]