KS0337 Keyestudio UNO Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Cable
This kit includes a keyestudio UNO board, a transparent 400-hole breadboard, a black chassis, 65 pieces of breadboard jumper wires and a blue USB cable. For more detailed use, you can check it as follows.
keyestudio UNO Board
keyestudio Uno R3 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
For more detailed information, you can see it from the link below.
400 Tie-Points Breadboard
This is a half-size transparent breadboard, good for small projects. It has 2 power rails on both sides, a standard double-strip in the middle with 30 columns and 10 rows - a total of 400 tie in points.
You can pull the power rails off easily to create 2 tiny breadboards, or "snap" these breadboards together either way to make longer and/or wider breadboards.
This tiny breadboard also has a self-adhesive on the back, so you can stick it onto an Arduino protoshield or keyestudio chassis.
- 400 Tie Points
- 2 power rails, 30 columns and 10 rows.
- Crystal and Self-adhesive
- Can be interlocked for larger projects
- Dimensions: 85*57*10mm
This keyestudio chassis of ABS material is particularly designed for project experiments. It is waterproof and has great stability. You can fix both arduino board and small breadboard onto it.
This brand-new USB extension cable is sealed with PVC shell, flexible and durable. It comes with standard and high quality USB port, supporting data transfer and fast charging.
- Length: 50cm
- Superior interface
- Stable transmission
Breadboard Jumper Wire Pack of 65
M/M breadboard jumper wire pack, totally 65 pieces in several types of length and many colors. These flexible jumper wires are basic component that connects two or more devices. They are produced in many colors so you can easily pick up the right one when lots are plugged.
They provide an easy way to build your own circuitry on a breadboard. Suited for Arduino and standard breadboard electrical design and debugging.
- 1) 100% Brand New
- 2) Male to Male Connector
- 3) Includes variety of colors and length
- 4) The length of the wire: 12cm, 16cm, 20cm, 24cm
- 5) Perfect design for breadboards and Arduino.
- From Official website: http://www.keyestudio.com/ks0337.html