Ks0016 keyestudio Piranha LED Light Module

From Keyestudio Wiki
Jump to: navigation, search

Introduction

This is a special LED module. When you connect it to ARDUINO development board, after programming, it can emit beautiful light. Of course, you can also control it using PWM. It looks like fireflies at night. Sounds cool? You can also combine it with other sensors to do various interesting interactive experiments.
thumb

Specification

  • Module Type: digital
  • Working Voltage: 5v
  • Distance between Pins: 2.54mm
  • Size: 30*20mm
  • Weight: 3g

Connection Diagram


thumb

Sample Code

int led = 3; 
void setup()
{
  pinMode(led, OUTPUT);     //Set Pin3 as output
}
void loop()
{      digitalWrite(led, HIGH);   //Turn off led
          delay(2000);
          digitalWrite(led, LOW);    //Turn on led
          delay(2000);
}

Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0016-keyestudio-piranha-led-module/

PDF

https://drive.google.com/open?id=1w4FUtvDNJZch6KjylTJKyMkuHt7NDBON

Get One Now

Official Website

http://www.keyestudio.com/keyestudio-piranha-led-module.html