Ks0135 keyestudio EASY plug Bluetooth Module

From Keyestudio Wiki
Jump to: navigation, search

EASY plug Bluetooth Module


thumb

Introduction

This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.1+EDR standard. In Bluetooth 2.1, signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of bluetooth chip can be reduced substantially and more sleeping time can be saved for bluetooth.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Bluetooth protocol: Bluetooth 2.1+ EDR standard
  • USB protocol: USB v1.1/2.0
  • Operating frequency: 2.4GHz ISM frequency band
  • Modulation mode: Gauss frequency Shift Keying
  • Transmit power: ≤ 4dBm, second stage
  • Sensitivity: ≤-84dBm at 0.1% Bit Error Rate
  • Transmission speed: 2.1Mbps(Max)/160 kbps(Asynchronous); 1Mbps/1Mbps(Synchronous)
  • Safety feature: Authentication and encryption
  • Supported configuration: Bluetooth serial port (major and minor)
  • Supply Voltage: 5V DC 50mA
  • Operating temperature: -20 to 55℃
  • Size: 49*15.4mm
  • Weight: 6g

Connection Diagram


thumb


Sample Code

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("Hello keyes!");
}}

Resources

PDF

https://drive.google.com/open?id=1Mr_r2QrY43AbX_7-N4BhA-3FyjT9b3Zu

APP

https://drive.google.com/open?id=1oApP29DAwwSeDy0jxN59TeVWW50c3HI8

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-bluetooth-2-0-module-for-arduino.html