Ks0144 keyestudio Bluetooh XBee Bluetooth wireless module HC-06

From Keyestudio Wiki
Jump to: navigation, search

Bluetooh XBee Bluetooth Wireless Module HC-06


thumb

Introduction

Keyestudio Bluetooh XBee Bluetooth wireless module HC-06 adopts XBEE design. It has features of compact size, compatible with XBEE shield, and suitable for various 3.3V MCU systems. The module can use AT command to set baud rate and master/slave mode. The default settings are baud rate 9600, paring password 1234, slave mode.
It comes with efficient on-board antenna. The exposed antenna ensures better signal quality and longer transmitting distance. Transparent serial port can be used to pair up with various Bluetooth adapters, Bluetooth phones. The humanized design offers convenience for secondary development.
After testing, the module is known to be suitable in using with all Bluetooth adapters on the market (PC and phones with Bluetooth) .


Specification

  • Supply voltage: 3.3V (voltage above 3.3V is forbidden. It will damage the module)
  • Bluetooth paring user name: HC-06
  • Bluetooth paring password: 1234
  • Default baud rate: 9600
  • Modified baud rate takes effect after module reboot

Resources

Video

http://www.keyestudio.com/wp/2016/06/ks0144-keyestudio-bluetooh-xbee-bluetooth-wireless-module-hc-06/

PDF

https://drive.google.com/open?id=1ZvHOkfLVKZByckfME3xjVl1BTu3Vnhub

Get One Now

Official Website

http://www.keyestudio.com/new-keyestudio-bluetooh-xbee-bluetooth-wireless-module-hc-06-for-arduino.html