Ks0168 keyestudio keyestudio L9110 fan control module

From Keyestudio Wiki
Jump to: navigation, search

keyestudio L9110 Fan Control Module


thumb

Introduction

keyestudio L9110 fan control module adopts L9110 motor control chip. It can control the rotation direction of the motor, hence the fan. The module is designed with mounting hole, compatible with servo motor control. The module is of high efficiency, with the high quality fan, it can easily blow out flame of a light in 20cm distance. It’s an essential part in fire fighting robot development.

thumb

Specification

  • Size: 50*26*15mm
  • Fan diameter: 75mm
  • Working voltage: 5V

Circuit Connection


thumb

Sample Code

int INA = 9;  
int INB = 10;
void setup() 
{ 
pinMode(INA,OUTPUT); 
pinMode(INB,OUTPUT); 
} 
void loop() 
{ 
analogWrite(INA, 255);
digitalWrite(INB,LOW); 
delay(5000);
digitalWrite(INA,LOW);
digitalWrite(INB,LOW); 
delay(200); 
digitalWrite(INA,LOW);
analogWrite(INB, 255);
delay(5000); 
digitalWrite(INA,LOW);
digitalWrite(INB,LOW); 
delay(200); 
}

Test Result

The fan will rotate clockwise for 5S at Max speed, stops for 0.2S; then rotate counter-clockwise for 5S at Max speed, stops for 0.2S; then repeats the cycle.

Resources

Video:

http://www.keyestudio.com/wp/ks0168/

PDF:

https://drive.google.com/open?id=1hZpJW5mVssSRZMU5c-2fp4heGbNTokM5

Buy From

Official Website

http://www.keyestudio.com/keyestudio-l9110-fan-module-for-arduio.html