Ks0225 keyestudio EASY plug Green Piranha LED Module

From Keyestudio Wiki
Jump to: navigation, search

EASY plug Green Piranha LED Module



This is a special LED module. When you connect it to ARDUINO, after program, it can emit beautiful green light. Of course, you can also control it using PWM. It will be like fireflies at night. Isn’t it cool? You can also combine it with other sensors to do various interesting interactive experiments.
Note: this module needs to be used together with EASY plug control board. You can also choose other LED to emit the light of different color like blue, red, yellow and white.


  • Interface: Easy plug
  • Sensor Type: digital
  • Working Voltage: 5V
  • Pin Pitch: 2.54mm
  • Size: 33.7*20mm
  • Weight: 3g

Connection Diagram


Sample Code

int ledPin = 11; // define digital pin 11
void setup()
pinMode(ledPin, OUTPUT);// define LED pin as output
void loop()
analogWrite(ledPin,255); //set the LED on, regulate light brightness, ranging from 0-255, 255 is the brightest
delay(1000); // wait for a second
digitalWrite(ledPin, LOW); // set the LED off
delay(1000); // wait for a second




Buy from

Official Website