Ks0231 keyestudio EASY plug Digital Blue LED Module

From Keyestudio Wiki
Jump to: navigation, search

EASY plug Digital Blue LED Module


thumb

Introduction

This LED module emits shiny blue light, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.
Note: this module needs to be used together with EASY plug control board. You can also choose other LED to emit different color of light like red, green, yellow and white.

Specification

  • Interface: Easy plug
  • Sensor Type: Digital
  • PH2.54 socket
  • Enables interaction with light-related works
  • Size: 33.7*20mm
  • Weight: 5g

Connection Diagram


thumb

Sample Code

int led = 9;
void setup()
{
 pinMode(led, OUTPUT);     //Set Pin9 as output
}
void loop()
{
         digitalWrite(led, HIGH);   //Turn on led
         delay(2000);
         digitalWrite(led, LOW);    //Turn off led
         delay(2000);
}

Resources

Datasheet

https://drive.google.com/open?id=19MygKj4zjLggj387jBkrmHrloe0wEryp

Buy from

Official Website

http://www.keyestudio.com/easy-plug-digital-blue-led-module.html