Ks0235 keyestudio Blue Piranha LED Module

From Keyestudio Wiki
Jump to: navigation, search

Blue Piranha LED Module


thumb

Introduction

This is a special LED module. When you connect it to ARDUINO development board, after program, it can emit beautiful blue light. Of course, you can also control it using PWM. It will be like fireflies at night. Isn’t cool? You can also combine it with other sensors to do various interesting interactive experiments.
Note: You can also choose other LED to emit the light of different color like yellow, red, green and white.

Specification

  • Module type: digital
  • Working voltage: 5v
  • Distance between pins: 2.54mm
  • Size: 30*20mm
  • Weight: 3g

Connection Diagram


thumb

Sample Code

int led = 3; 
void setup()
{
  pinMode(led, OUTPUT);     //Set Pin3 as output
}
void loop()
{      digitalWrite(led, HIGH);   //Turn off led
          delay(2000);
          digitalWrite(led, LOW);    //Turn on led
          delay(2000);
}

Resources

PDF

https://drive.google.com/open?id=18NXCwE7R9A8w_FJFPTFotwRX7jgNYxvB

Buy from

Official Website

http://www.keyestudio.com/blue-piranha-led-module.html