KS0215 keyestudio RPI T-type GPIO Shield

From Keyestudio Wiki
Jump to navigation Jump to search


thumb

Introduction

This RPI T-type GPIO extension board is specifically designed for Raspberry Pi B+, helping you to connect external device on the breadboard. This board can be plugged into any solderless breadboard. The PCB has all pins labeled nicely, so you can directly build circuits without keeping a pin-out printout at your desk.

Documents

File:

https://drive.google.com/open?id=1309GFYVPZwPOBOqR1904CCM0fNGei9kD

Buy From

http://www.keyestudio.com/ks0215.html