KS0337 Keyestudio UNO Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Cable: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
(40 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[ | |||
[[File:0337-10.png|thumb|400px|right|Keyestudio REV4 Board + 400 Tie-Points Breadboard + Chassis + Breadboard Wire Pack of 65 + USB Cable]] | |||
==Introduction== | ==Introduction== | ||
This kit includes a keyestudio | This kit includes a keyestudio REV4 board, a transparent 400-hole breadboard, a black chassis, 65 pieces of breadboard jumper wires and a blue USB cable. For more detailed use, you can check it as follows. | ||
==keyestudio REV4 Board== | |||
keyestudio REV4 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO REV4. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. <br> | |||
For more detailed information, you can see it from the link below.<br> | For more detailed information, you can see it from the link below.<br> | ||
http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD | http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD | ||
<br>[[File:0337-11.png|400px|frameless]]<br> | |||
==400 Tie-Points Breadboard== | ==400 Tie-Points Breadboard== | ||
This is a half-size transparent breadboard, good for small projects. It has 2 power rails on both sides, a standard double-strip in the middle with 30 columns and 10 rows - a total of 400 tie in points. | This is a half-size transparent breadboard, good for small projects. It has 2 power rails on both sides, a standard double-strip in the middle with 30 columns and 10 rows - a total of 400 tie in points. <br> | ||
You can pull the power rails off easily to create 2 tiny breadboards, or "snap" these breadboards together either way to make longer and/or wider breadboards. | You can pull the power rails off easily to create 2 tiny breadboards, or "snap" these breadboards together either way to make longer and/or wider breadboards. <br> | ||
This tiny breadboard also has a self-adhesive on the back, so you can stick it onto an Arduino protoshield or keyestudio chassis. | This tiny breadboard also has a self-adhesive on the back, so you can stick it onto an Arduino protoshield or keyestudio chassis. | ||
<br>[[Image:KS0337-1.jpg|600px|frameless]]<br> | <br>[[Image:KS0337-1.jpg|600px|frameless]]<br> | ||
<br> | |||
'''Features:''' <br> | |||
* 400 Tie Points | * 400 Tie Points | ||
* 2 power rails, 30 columns and 10 rows. | * 2 power rails, 30 columns and 10 rows. | ||
Line 29: | Line 33: | ||
==Keyestudio chassis== | ==Keyestudio chassis== | ||
This keyestudio chassis of ABS material is particularly designed for project experiments. It is waterproof and has great stability. You can fix both arduino board and small breadboard onto it. | This keyestudio chassis of ABS material is particularly designed for project experiments. It is waterproof and has great stability. You can fix both arduino board and small breadboard onto it. | ||
<br>[[Image:KS0337-2. | <br>[[Image:KS0337-2.png|500px|frameless]]<br> | ||
<br> | |||
'''Example Show:''' | |||
<br>[[File:0337-12.png|500px|frameless]]<br> | |||
==USB Cable== | ==USB Cable== | ||
[[image:KS0337-4.jpg|thumb|300px]] | |||
This brand-new USB extension cable is sealed with PVC shell, flexible and durable. It comes with standard and high quality USB port, supporting data transfer and fast charging. | This brand-new USB extension cable is sealed with PVC shell, flexible and durable. It comes with standard and high quality USB port, supporting data transfer and fast charging. | ||
* Length: 50cm | * Length: 50cm | ||
* Superior interface | * Superior interface | ||
* Stable transmission | * Stable transmission | ||
Line 46: | Line 50: | ||
M/M breadboard jumper wire pack, totally 65 pieces in several types of length and many colors. These flexible jumper wires are basic component that connects two or more devices. They are produced in many colors so you can easily pick up the right one when lots are plugged. | M/M breadboard jumper wire pack, totally 65 pieces in several types of length and many colors. These flexible jumper wires are basic component that connects two or more devices. They are produced in many colors so you can easily pick up the right one when lots are plugged. | ||
They provide an easy way to build your own circuitry on a breadboard. Suited for Arduino and standard breadboard electrical design and debugging. | They provide an easy way to build your own circuitry on a breadboard. Suited for Arduino and standard breadboard electrical design and debugging. | ||
<br>[[Image:KS0337-.jpg|600px|frameless]]<br> | <br>[[Image:KS0337-5.jpg|600px|frameless]]<br> | ||
<br> | |||
'''Features:''' <br> | |||
* 1) 100% Brand New <br> | |||
* 2) Male to Male Connector <br> | |||
* 3) Includes variety of colors and length <br> | |||
* 4) The length of the wire: 12cm, 16cm, 20cm, 24cm <br> | |||
* 5) Perfect design for breadboards and Arduino.<br> | |||
=== | ==For Applications== | ||
<br>[[File:0337-13.png|600px|frameless]]<br> | |||
== | ==Packaging Display== | ||
<br>[[Image:KS0337- | * Keyestudio REV4 Board x1 | ||
* 400 Tie-Points Breadboard x1 | |||
* Chassis with four screws x1 | |||
* Breadboard Wire Pack of 65 x1 | |||
* USB Cable x1 | |||
<br>[[Image:KS0337-8.png|500px|frameless]][[Image:KS0337-9.png|500px|frameless]]<br> | |||
== Resource == | |||
*[https://fs.keyestudio.com/KS0337 Click here to download the datasheet] | |||
== Buy From == | |||
* [https://www.keyestudio.com/keyestudio-uno-r3-board-400-holes-transparent-breadboard-chassis-65-jumper-wires-50-cm-usb-cable-for-arduino-diy-project-p0044.html '''From Official website''' ] | |||
* [https://www.amazon.com/dp/B07DVLV584 '''From Amazon store''' ] | |||
* [https://www.aliexpress.com/store/product/Keyestudio-UNO-R3-Board-400-Holes-Transparent-Breadboard-Chassis-65-Jumper-Wires-50-cm-USB-Cable/1452162_32887463590.html?spm=2114.12010612.8148356.31.76405f38b3CZGD '''From Aliexpress store''' ] | |||
Latest revision as of 15:53, 9 March 2021
Introduction
This kit includes a keyestudio REV4 board, a transparent 400-hole breadboard, a black chassis, 65 pieces of breadboard jumper wires and a blue USB cable. For more detailed use, you can check it as follows.
keyestudio REV4 Board
keyestudio REV4 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO REV4. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
For more detailed information, you can see it from the link below.
http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD
400 Tie-Points Breadboard
This is a half-size transparent breadboard, good for small projects. It has 2 power rails on both sides, a standard double-strip in the middle with 30 columns and 10 rows - a total of 400 tie in points.
You can pull the power rails off easily to create 2 tiny breadboards, or "snap" these breadboards together either way to make longer and/or wider breadboards.
This tiny breadboard also has a self-adhesive on the back, so you can stick it onto an Arduino protoshield or keyestudio chassis.
Features:
- 400 Tie Points
- 2 power rails, 30 columns and 10 rows.
- Crystal and Self-adhesive
- Can be interlocked for larger projects
- Dimensions: 85*57*10mm
Keyestudio chassis
This keyestudio chassis of ABS material is particularly designed for project experiments. It is waterproof and has great stability. You can fix both arduino board and small breadboard onto it.
Example Show:
USB Cable
This brand-new USB extension cable is sealed with PVC shell, flexible and durable. It comes with standard and high quality USB port, supporting data transfer and fast charging.
- Length: 50cm
- Superior interface
- Stable transmission
Breadboard Jumper Wire Pack of 65
M/M breadboard jumper wire pack, totally 65 pieces in several types of length and many colors. These flexible jumper wires are basic component that connects two or more devices. They are produced in many colors so you can easily pick up the right one when lots are plugged.
They provide an easy way to build your own circuitry on a breadboard. Suited for Arduino and standard breadboard electrical design and debugging.
Features:
- 1) 100% Brand New
- 2) Male to Male Connector
- 3) Includes variety of colors and length
- 4) The length of the wire: 12cm, 16cm, 20cm, 24cm
- 5) Perfect design for breadboards and Arduino.
For Applications
Packaging Display
- Keyestudio REV4 Board x1
- 400 Tie-Points Breadboard x1
- Chassis with four screws x1
- Breadboard Wire Pack of 65 x1
- USB Cable x1