KS0419 keyestudio micro:bit Tactile Button Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 35: Line 35:
==Resources ==
==Resources ==


*'''Download relevant datasheet and code:''' https://drive.google.com/open?id=11gosB52jSICGn5WC3Fgu0CRJymxeXdxG
*'''Download relevant datasheet and code:
 
''' https://fs.keyestudio.com/KS0419


* [http://microbit.org/  BBC micro:bit website ] <br>
* [http://microbit.org/  BBC micro:bit website ] <br>
Line 44: Line 46:
* [http://microbit.org/guide/quick/  BBC micro:bit Quick Start Guide ]  <br>
* [http://microbit.org/guide/quick/  BBC micro:bit Quick Start Guide ]  <br>
* [http://microbit.org/guide/hardware/pins/  BBC micro:bit Pins ]
* [http://microbit.org/guide/hardware/pins/  BBC micro:bit Pins ]
<br>





Latest revision as of 11:15, 4 March 2021

keyestudio Tactile Button Module For BBC micro:bit


Description

This keyestudio tactile button module is fully compatible with micro:bit control board. It mainly uses a button element, which is a digital signal output device.
When using, connect the module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).
When press the button, the signal end of micro:bit main board will input HIGH level signal.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Output Signal: Digital
  • Dimensions: 31mm*27mm*6.5mm
  • Weight: 1.8g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, press the button, the micro:bit main board will show icons.
thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0419



Get One Now