KS0486 Keyestudio PLUS Development Board (Black And Eco-friendly): Difference between revisions
Keyestudio (talk | contribs) (Created blank page) |
Keyestudio (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[[image:Ks0249 (2).png|thumb|900px|right| ]] | |||
1.Description | |||
Doing experiment for electronic products, we often program on the Arduino IDE development environment by arduino series microcontrollers. | |||
Keyestudio PLUS control board is fully compatible with Arduino IDE development environment. It contains all the functions of the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as shown below). In order to wire efficiently, we equip with a 1m USB cable of type-c interface for you. | |||
[[File:0486.png|thumb|900px| ]] | |||
2.Specifications | |||
USB to serial chip: CP2102 | |||
Working voltage: 5V or 3.3V (DIP switch control) | |||
External power: DC 6-15V (recommend 9V) | |||
Digital I / O pins: 14 (D0-D13) | |||
PWM channel: 6 (D3 D5 D6 D9 D10 D11) | |||
Analog input channel (ADC): 8 (A0-A7) | |||
Each I / O Port of DC output capability : 20 mA | |||
Output capability of 3.3V port: 50 mA | |||
Flash Memory: 32 KB (of which 0.5 KB is used by the bootloader) | |||
SRAM: 2 KB (ATMEGA328P-AU) | |||
EEPROM: 1 KB (ATMEGA328P-AU) | |||
Clock speed: 16MHz | |||
On-board LED pin: D13 | |||
Revision as of 17:36, 13 March 2020
.png)
1.Description
Doing experiment for electronic products, we often program on the Arduino IDE development environment by arduino series microcontrollers. Keyestudio PLUS control board is fully compatible with Arduino IDE development environment. It contains all the functions of the Arduino UNO R3 board. Moreover, some improvements we made highly strengthen its function(as shown below). In order to wire efficiently, we equip with a 1m USB cable of type-c interface for you.
2.Specifications
USB to serial chip: CP2102 Working voltage: 5V or 3.3V (DIP switch control) External power: DC 6-15V (recommend 9V) Digital I / O pins: 14 (D0-D13) PWM channel: 6 (D3 D5 D6 D9 D10 D11) Analog input channel (ADC): 8 (A0-A7) Each I / O Port of DC output capability : 20 mA Output capability of 3.3V port: 50 mA Flash Memory: 32 KB (of which 0.5 KB is used by the bootloader) SRAM: 2 KB (ATMEGA328P-AU) EEPROM: 1 KB (ATMEGA328P-AU) Clock speed: 16MHz On-board LED pin: D13