KS4030 Keyestudio Micro:bit IO Port Expansion Sensor Shield with Level Conversion

From Keyestudio Wiki
Jump to navigation Jump to search


thumb


Description

When we are doing DIY experiments, we often use the Micro:bit control boards and sensor u[. In order to facilitate the wiring-up, the Micro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequence, the sensor/module won’t burn out. The expansion board has 2.54mm anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage is 3.3~5V. In addition, it comes with four 3mm positioning holes, which is convenient to fix on other devices.


Specification

  • Working voltage: 3.3V~5V
  • Current: 500mA
  • Maximum power: 2.5W
  • Weight: 25.1g
  • Operating temperature range: 0~50°C
  • Interface: 2.54mm anti-reverse interface
  • Size: 70.2*56*1.6mm
  • Hole diameter: 3mm

Schematic Diagram


[File:Ks4030-2.png|500px|frameless|thumb]]

thumb

thumb

thumb

Pin out


thumb

Test Results


thumb

thumb

thumb