Ks0003 keyestudio Protoshield for Arduino with Mini Breadboard: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[image:ks0003.png|thumb|500px|right|Keyestudio 2560 R3 Board]]
==Introduction==
==Introduction==
Keyestudio Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it.
For convenient use, there is a large prototyping space of both connected and unconnected spaced through-holes on the shield.<br>
There is also a soldering position reserved for SMD chip on the protoshield. You can easily solder SMD ICs on the prototyping area to test them with your Arduino board.
It also extends out a row of power and ground spaced through-holes, giving enough port resources.  <br>
You can even stick a mini 170-holes breadboard (included) on the prototyping area. You can weld elements on the shield directly or connect circuits with the mini breadboard.<br>
==Product Parameters==
* Can be plugged into the Arduino controller.
* Extend 5V, 3V and Arduino Vin voltage.
* Comes with a Reset button.
* Extend out all control pins and power pins of the Arduino.
* Able to build the prototyping circuits matched with Arduino.
* Access to SOIC SMD pin, supporting the soldering of SOIC chips up to 14pin.
* Includes a 170-hole breadboard.
==Controllers Compatible==
* [http://www.keyestudio.com/ks0001.html keyestudio UNO R3 BOARD] /Arduino UNO R3
* [http://www.keyestudio.com/easy-plug-control-board.html keyestudio EASY plug Control Board]
* [http://www.keyestudio.com/keyestudio-leonardo-r3-development-board.html keyestudio Leonardo R3 Development Board]
* 51duino
==PCB Dimensions==
<br>[[Image:KS0003-1.jpg|600px|frameless]]<br>
==Pinout Instructions==
<br>[[Image:KS0003-2.jpg|600px|frameless]]<br>
==Mini Breadboard==
This is a solderless mini breadboard. It has 10 columns, and 17 rows - a total of 170 tie in points. This mini breadboard has a self-adhesive on the back. 
You can stick it on the prototyping area of protoshield for solderless operation.
<br>[[Image:KS0003-3.jpg|600px|frameless]]<br>
==Example Use==
You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use an LED, a resistor and several breadboard jumper wires to build the circuit experiments.
<br>[[Image:KS0003-4.jpg|600px|frameless]]<br>


keyestudio Protoshield for Arduino is used to build circuit prototype. you can weld elements on the board directly or connect circuits with the mini breadboard. The breadboard is connected to the circuit board by a double-sided adhesive.<br>
This protoshield is set with two LED and two button circuits which can be used directly and all the pins and power supply has been drawn. It is very suitable for working with Arduino to build a circuit prototype.<br>
[[File:ks0003.png]]


==Resources==
==Resources==
Line 14: Line 54:


http://www.keyestudio.com/files/index/download/id/1463642357/
http://www.keyestudio.com/files/index/download/id/1463642357/


==Get One Now==
==Get One Now==

Revision as of 14:49, 26 July 2018

Keyestudio 2560 R3 Board

Introduction

Keyestudio Proto Shield is particularly designed for the Arduino UNO R3. It makes it easy for you to design custom circuits and solder electronics directly on it. For convenient use, there is a large prototyping space of both connected and unconnected spaced through-holes on the shield.
There is also a soldering position reserved for SMD chip on the protoshield. You can easily solder SMD ICs on the prototyping area to test them with your Arduino board. It also extends out a row of power and ground spaced through-holes, giving enough port resources.
You can even stick a mini 170-holes breadboard (included) on the prototyping area. You can weld elements on the shield directly or connect circuits with the mini breadboard.


Product Parameters

  • Can be plugged into the Arduino controller.
  • Extend 5V, 3V and Arduino Vin voltage.
  • Comes with a Reset button.
  • Extend out all control pins and power pins of the Arduino.
  • Able to build the prototyping circuits matched with Arduino.
  • Access to SOIC SMD pin, supporting the soldering of SOIC chips up to 14pin.
  • Includes a 170-hole breadboard.


Controllers Compatible


PCB Dimensions


File:KS0003-1.jpg


Pinout Instructions


File:KS0003-2.jpg


Mini Breadboard

This is a solderless mini breadboard. It has 10 columns, and 17 rows - a total of 170 tie in points. This mini breadboard has a self-adhesive on the back. You can stick it on the prototyping area of protoshield for solderless operation.
File:KS0003-3.jpg


Example Use

You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use an LED, a resistor and several breadboard jumper wires to build the circuit experiments.
File:KS0003-4.jpg


Resources

Video

http://www.keyestudio.com/wp/ks0003/

Datasheet

http://www.keyestudio.com/files/index/download/id/1463642357/


Get One Now

Official

http://www.keyestudio.com/ks0003.html

Amazon

https://www.amazon.com/Keyestudio-protoshield-Arduino-mini-breadboard/dp/B0169NSYIQ/

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0003_keyestudio_Protoshield_for_Arduino_with_Mini_Breadboard&oldid=9619"