Ks0086 ARDUBLOCK Graphical Programming Starter Kit

From Keyestudio Wiki
Revision as of 14:25, 25 August 2016 by Keyestudio (talk | contribs) (Created page with "==ARDUBLOCK Graphical Programming Starter Kit== <br>500px|frameless|thumb<br> ==1. Introduction== Ardublock zero-based programming kit is a new graphic...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

ARDUBLOCK Graphical Programming Starter Kit


thumb

1. Introduction

Ardublock zero-based programming kit is a new graphical programming study kit which is based on Arduino enthusiasts and developed by keyestudio. It greatly lowers the difficulty in program learning for enthusiasts. All computer language and professional statements of a program can be simplified into blocks. Compiling is as easy as block building. Interactive with Arduino development board, they can achieve exciting works.

The open source feature of Arduino makes it extremely popular. You can find a many learning communities on the Internet. Ardublock is a graphical programming environment, just like blocks building, which greatly lowers the learning difficulty for starters. As long as you love it, everyone can play with Arduino without professional knowledge or relevant background. As for parents who stress on the education of next generation, this will be one of your best way to interact with your children.


2. Kit Contents

Project 1 LED Blinking	
Project 2 PWM Regulating Light Brightness	
Project 3 Flowing Light	
Project 4 Button-controlled LED	
Project 5 Passive Buzzer Sound Production	
Project 6 Active Buzzer Sound Production	
Project 7 Reading-out Analog Value	
Project 8 Light-controlled Sound	
Project 9 Sound-controlled Light	
Project 10 Servo Motor Control	
Project 11 Ultrasonic Distance Measurement	
Project 12 PS2 Joystick Module
Project 13 LM35 Temperature Sensor	
Project 14 5V Relay Module	
Project 15 Tilting Switch Module	
Project 16 Capacitive Touch Module Control LED	
Project 17 Flame Alarm Module	
Project 18 Reed Switch Module
Project 19 Human Body IR Pyroelectricity	
Project 20 Line Tracking Sensor	
Project 21 MQ-2 Combustible Gas and Smoke Sensor	
Project 22 Soil Module	


3. Application of Arduino


thumb

Introduction

What’s Arduino? Arduino is an open-source hardware project platform. This platform includes a circuit board with simple I/O function and program development environment software. It can be used to develop interactive products. For example, it can read signals of multiple switches and sensors, and control light, servo motor and other various physical devices. It’s widely applied in robot field.


4. Arduino installation and program upload

First, download Arduino development software, click below hyperlink: https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x
Downloaded file is an arduino-1.5.6-r2-windows.zip compressed folder, and unzip it to your hard drive.
Double click Arduino-1.5.6 .exe. and select “I agree”.
thumb

Click “Next”.

thumb

And then “Install”.

thumb

Wait for the installation to be completed, and click close.
thumb

Below is how Arduino 1.5.6 looks like.
thumb

Next, let’s install Arduino driver.
For different operating system, there may be slight difference in installation method. Below is an example in WIN 7.
When you connect Arduino Uno to your computer the first time, right click “Computer” —> “Properties”—> “Device manager”, you can see “Unknown devices”.

thumb

Click “Unknown devices”, select “Update Driver software”.
thumb

In this page, click “Browse my computer for driver software”.
thumb

Find the “drivers” file.
thumb

Click “Next”; select “Install this driver software anyway” to begin the installation.
thumb

Installation completed; click “Close”.
thumb

After driver is installed, go to “Device manager” again. Right click “Computer” —> “Properties”—> “Device manager”, you can see UNO device as below figure shows, also the Com port info.
thumb

Following is a sketch uploading example called “Hello World!”.
First, open Arduino IDE. In this example sketch, we program Arduino to display “Hello World!” in serial monitor when it receives a specific character string “R”; also the on-board D13 LED will blink once each time it receives “R”.
First, set up board; In “Tools”, select “Arduino Uno”.

thumb

Next, set up COM port; In “Tools”, select “COM3”.
thumb

After selection, you can see indicated area is the same with settings in “Device manager”.
thumb

Copy the example sketch and paste it to the IDE; click “Verify ” to check compiling mistakes; click “Upload ” to upload the program to the board.
thumb

After uploading is done, open “serial monitor ”; enter “R”; click “Send”, the serial monitor will display “Hello World!” and the D13 LED will blink once.
thumb
Congratulations! Your first sketch uploading is a success!

Operating video and related material download address: http://7326097.s21d-7.faiusrd.com/0/ABUIABAAGAAggfjavAUopJzsjAI?f=operating+vedio+and+related+material.zip&v=1469496323


5. Introduction of ArduBlock

Ardublock, developed by Shanghai Xinchejian, is a graphical programming environment software. ArduBlock is a third-party software of Arduino’s official programming environment. It can only work with Arduino software. Different from Arduino's text-based programming environment, it's in graphical form. Programming is like building blocks, which makes programming more visualized and interactive. It also greatly lowers the difficulties in programming. People with no programming experience can also compile a program for Arduino controller.

1. Installation Put “ardublock-beta-20140828”this file into the installing catalog of arduino IDE software, if no installing catalog, create one, for example, I put the file in D:\Program Files\Arduino\tools\ArduBlockTool\tool

Download Address of ardublock-beta-20140828: http://7326097.s21d-7.faiusrd.com/0/ABUIABAAGAAg56fbvAUogIzwugc?f=ardublock-beta-20140828.jar&v=1469502439


6. Project Details

After having a basic understanding of Arduino and ArduBlock , we are going to learn graphical programming by actual operation.

Project 1: LED Blinking

Introduction: This project is one of the basic experiments, which can achieve LED blinking by graphical programming.

Materials Required:
1. KEYESTUDIO UNO Control Board *1
2. V5 Sensor Shield*1
3. Piranha LED*1
4. Female to Female Dupont Line*1

Connection Diagram:


thumb

thumb

After wiring, we can start programming. We will turn the LED on for one second, and off for one second. This program is simple and similar to one that comes with Arduino except it’s connected to digital pin 10 rather than 13.
thumb
Click “download to Arduino” to see the codes in Arduino interface.

Sample Code:

*****************************************************************************
void setup()
{
  pinMode( 10 , OUTPUT);
}

void loop()
{
  digitalWrite( 10 , HIGH );
  delay( 1000 );
  digitalWrite( 10 , LOW );
  delay( 1000 );
}
*******************************************************************************

}

Result:
Then, you can see the high brightness LED blinking. We have now finished this project!

Note: Arduino software selection On the TOOLS menu, select UNO. COM port selects the same serial port with the first installation. You cannot download program unless both requirements are met.