Ks0094 Arduino CNC kit / CNC Shield V2.0 +keyestudio Uno R3+3pcs A4988 Driver / GRBL Compatible

From Keyestudio Wiki
Revision as of 14:26, 24 September 2016 by Keyestudio (talk | contribs) (Created page with "==Arduino CNC kit / CNC Shield V2.0 +keyestudio uno R3+3pcs A4988 driver / GRBL compatible== <br>500px|frameless|thumb<br> ==CNC Shield V2.0 features:==...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Arduino CNC kit / CNC Shield V2.0 +keyestudio uno R3+3pcs A4988 driver / GRBL compatible


thumb

CNC Shield V2.0 features:

•Arduino CNC Shield Version 2.0
•GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
•3-Axis support (X, Y, Z , )
•2 x End stops for each axis (6 in total)
•Spindle enable and direction
•Coolant enable
•Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)
•Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
•Compact design.
•Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
•Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Kit list:

1x CNC Shield V2.0
1x keyestudio uno R3 board
3x A4988 driver
1x USB cable

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0094_Arduino_CNC_kit_/_CNC_Shield_V2.0_%2Bkeyestudio_Uno_R3%2B3pcs_A4988_Driver_/_GRBL_Compatible&oldid=1769"