Ks0103 keyestudio EASY plug Passive Buzzer Module

From Keyestudio Wiki
Jump to navigation Jump to search

EASY plug Passive Buzzer Module


thumb

Introduction

We can use Arduino to make many interactive works of which the most commonly used is acoustic-optic display. The buzzer we introduced here is a passive buzzer. It cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds. We can use Arduino to code the melody of a song, which is actually quite fun and simple.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Working voltage: 3.3-5v
  • Sensor type: digital
  • Size: 39*20mm
  • Weight: 6g


Connection Diagram


thumb


Sample Code

int buzzer=8;//set digital IO pin of the buzzer
void setup()
{
pinMode(buzzer,OUTPUT);// set digital IO pin pattern, OUTPUT to be output
}
void loop()
{ unsigned char i,j;//define variable
while(1)
{ for(i=0;i<80;i++)// output a frequency sound
{ digitalWrite(buzzer,HIGH);// sound
delay(1);//delay1ms
digitalWrite(buzzer,LOW);//not sound
delay(1);//ms delay
}
for(i=0;i<100;i++)// output a frequency sound
{
digitalWrite(buzzer,HIGH);// sound
digitalWrite(buzzer,LOW);//not sound
delay(2);//2ms delay
}
}
}


Resources

PDF

https://drive.google.com/open?id=1pQj561dWpMkzIBY1siyFwDCJgOCjXUPi

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-passive-buzzer-module-for-arduino.html