Ks0105 keyestudio EASY plug Analog Sound Sensor

From Keyestudio Wiki
Jump to navigation Jump to search

EASY plug Analog Sound Sensor


thumb

Introduction

Analog Sound Sensor is typically used in detecting the loudness in ambient environment. The Arduino can collect its output signal by imitating the input interface. You can use it to make some interesting interactive works such as a voice operated switch.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Supply Voltage: 3.3V to 5V
  • Detecting sound intensity
  • Sensor type: Analog
  • Size: 38*20mm
  • Weight: 6g


Connection Diagram


thumb


Sample Code

void setup()
{
 Serial.begin(9600); // open serial port, set the baud rate at 9600 bps
}
void loop()
{
     int val;
     val=analogRead(0);   //connect mic sensor to Analog 0
     Serial.println(val,DEC);// print the sound value to serial monitor      
     delay(100);
}

Resources

PDF

https://drive.google.com/open?id=1Rd2-D2ls9-8YS0o0njbK1bTLSarXd5CM

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-analog-sound-sensor-for-arduino.html