Ks0108 keyestudio EASY plug Soil Humidity Sensor: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
==EASY plug Soil humidity Sensor==
[[image:ks0108图.jpg|thumb|600px|right|Keyestudio EASY plug Soil Moisture Sensor]]
<br>[[File:ks0108-1.png|500px|frameless|thumb]]<br>


==Introduction==
==Introduction==
This is a simple soil humidity sensor aims to detect the soil humidity. If the soil is in lack of water, the analog value output by the sensor will decrease, otherwise, it will increase. If you use this sensor to make an automatic watering device, it can detect whether your botany is thirsty to prevent it from withering when you go out. Using the sensor with Arduino controller makes your plant more comfortable and your garden smarter.<br>
The EASY Plug soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an ideal for monitoring an urban garden, or your pet plant's water level.<br>
Note: this module needs to be used together with EASY plug control board.<br>
This soil moisture sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level. <br>
More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance).<br>
If you use this sensor to make an automatic watering device, it will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden. <br>
This module should be used together with EASY plug control board.<br>


<span style=color:red> '''Special Note:''' <br>
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>


==Specification==
<br>
* Interface: Easy plug
 
* Power Supply Voltage: 3.3V or 5V
==Features==
* Connector: Easy plug
* Power Supply: 3.3V or 5V
* Working Current: ≤ 20mA
* Working Current: ≤ 20mA
* Output Voltage: 0-2.3V (When the sensor is totally immersed in water, the voltage will be 2.3V) 5V power supply,the higher humidity, the higher the output voltage
* Output Voltage: 0-2.3V  
* Sensor type: Analog output
* Sensor type: Analog output
* Size: 65.5*20mm
* Surface finish: immersion tin
* Weight: 5g


<br>
==Technical Details==
* Dimensions: 66mm*20mm*18mm
* Weight: 4.8g


==Connection Diagram ==
<br>
<br>[[File:ks0108-2.png|500px|frameless|thumb]]<br>
==Connect It Up ==
Connect the EASY Plug soil sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
<br>[[File:KS0108.jpg|500px|frameless|thumb]]<br>


<br>
==Upload the Code==
Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly  Mixly Blocks] and upload. <br>
<br>[[File:ks0398 17.1.png|600px|frameless|thumb]]<br>


==Sample Code==
<br>
<pre>
==What You Should See==
/*
<br>[[File:ks0398 17-1.png|600px|frameless|thumb]]<br>
# Example code for the moisture sensor
<br>
# Connect the sensor to the A0(Analog 0) pin on the Arduino board
Done uploading the code, open the serial monitor and set the baud rate to 9600, you can see the analog value is 0. <br>
When place the two probes of moisture sensor into your plant soil, you can see the value change.
<br>[[File:ks0108 Result.png|600px|frameless|thumb]]
<br>[[File:ks0398 17-2.png|600px|frameless|thumb]]<br>


# the sensor value description
<br>
# 0 ~300    dry soil
==Adding OLED Display==
# 300~700    humid soil
If you want to display the soil moisture value more convenient, you can add OLED screen.<br>
# 700~950    in water
<br>
*/
'''Hookup Guide'''<br>
<br>[[File:OLED土壤.jpg|600px|frameless|thumb]]<br>


void setup(){
<br>
'''Test Code'''<br>
<br>[[File:ks0398 17.1.png|600px|frameless|thumb]]<br>


Serial.begin(57600);
<br>
'''What You Should See'''<br>
Upload success, you should see the soil value is showed on the OLED screen.
<br>[[File:ks0398 17-3.png|600px|frameless|thumb]]<br>
<br>


}
<br>
 
==Resources ==


void loop(){
https://fs.keyestudio.com/KS0108


Serial.print("Moisture Sensor Value:");
Serial.println(analogRead(0));
delay(100);
}
</pre>


==Resources ==
<br>


'''PDF'''
==Buy from ==
*[https://www.keyestudio.com/new-keyestudio-rj11-easy-plug-soil-humidity-sensor-module-for-arduino-steam-p0082-p0082.html    '''Official Website''' ]


https://drive.google.com/open?id=173shntqpkcu6_Mlxf6eEv9vE6Am_vPbh
*[https://www.aliexpress.com/store/product/2016-New-Keyestudio-EASY-plug-Soil-humidity-Sensor-Module-for-Arduino/1452162_32637462719.html?spm=2114.12010612.8148356.16.361557f6MHH2BI  Shop on aliexpress ]


==Buy from ==
'''Official Website'''


http://www.keyestudio.com/keyestudio-easy-plug-soil-humidity-sensor-module-for-arduino.html


[[category:EASY Plug]]
[[category:EASY Plug]]

Latest revision as of 15:58, 7 January 2021

Keyestudio EASY plug Soil Moisture Sensor

Introduction

The EASY Plug soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an ideal for monitoring an urban garden, or your pet plant's water level.
This soil moisture sensor uses the two probes to pass current through the soil, and then it reads that resistance to get the moisture level.
More water makes the soil conduct electricity more easily (less resistance), while dry soil conducts electricity poorly (more resistance).
If you use this sensor to make an automatic watering device, it will be helpful to remind you to water your indoor plants or to monitor the soil moisture in your garden.
This module should be used together with EASY plug control board.

Special Note:
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module.


Features

  • Connector: Easy plug
  • Power Supply: 3.3V or 5V
  • Working Current: ≤ 20mA
  • Output Voltage: 0-2.3V
  • Sensor type: Analog output
  • Surface finish: immersion tin


Technical Details

  • Dimensions: 66mm*20mm*18mm
  • Weight: 4.8g


Connect It Up

Connect the EASY Plug soil sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb


Upload the Code

Below is an example code. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See


thumb

Done uploading the code, open the serial monitor and set the baud rate to 9600, you can see the analog value is 0.
When place the two probes of moisture sensor into your plant soil, you can see the value change.
thumb
thumb


Adding OLED Display

If you want to display the soil moisture value more convenient, you can add OLED screen.

Hookup Guide

thumb


Test Code

thumb


What You Should See
Upload success, you should see the soil value is showed on the OLED screen.
thumb


Resources

https://fs.keyestudio.com/KS0108



Buy from