Ks0113 keyestudio EASY plug Capacitive Touch Sensor: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 21: Line 21:
<br>
<br>
==Connect It Up ==
==Connect It Up ==
Connect the EASY Plug touch sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
Connect the EASY Plug touch sensor and LED module to control board using RJ11 cable. Then connect the control board to your PC with a USB cable.
<br>[[File:ks0113.jpg|500px|frameless|thumb]]<br>
<br>[[File:触摸灯.jpg|500px|frameless|thumb]]<br>


<br>
==Upload the Code==
==Upload the Code==
Connect the EASY Plug touch sensor and LED module to control board using an RJ11 cable.
<br>[[File:触摸灯.jpg|500px|frameless|thumb]]<br>
<br>
<br>
'''Test Code'''<br>
Below is an example code.
Below is an example code for three LED modules experiment.
<br>[[File:ks0398 6.1.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6.1.png|500px|frameless|thumb]]<br>


<br>
<br>
'''What You Should See'''<br>
==What You Should See==
Done uploading the code, when you touch the sensor, the led on the sensor will light up.
Done uploading the code, when you touch the sensor, the led on the sensor will light up.
<br>[[File:ks0398 6-3.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6-3.png|500px|frameless|thumb]]<br>
 
<br>
Open the monitor, it will print out the value read from the touch sensor.
Open the monitor, it will print out the value read from the touch sensor.
<br>[[File:ks0398 6-2.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6-2.png|500px|frameless|thumb]]<br>
Line 43: Line 40:
<br>
<br>
====Simulating Table Lamp====
====Simulating Table Lamp====
<br>
'''Test Code'''<br>
'''Test Code'''<br>
<br>[[File:ks0398 6.2.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6.2.png|500px|frameless|thumb]]<br>
Line 49: Line 47:
Powered up and upload well the code, press down the button, LED light is turned on, it will not be off when release the button; But if press the button once again, LED will be turned off. It seems like your table lamp. <br>
Powered up and upload well the code, press down the button, LED light is turned on, it will not be off when release the button; But if press the button once again, LED will be turned off. It seems like your table lamp. <br>
<br>[[File:ks0398 6-5.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6-5.png|500px|frameless|thumb]]<br>
 
<br>
Open the monitor, you should be able to see how many times do you touch the sensor.
Open the monitor, you should be able to see how many times do you touch the sensor.
<br>[[File:ks0398 6-4.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6-4.png|500px|frameless|thumb]]<br>


<br>
<span style="color: red">'''Troubleshooting:'''</span> <br>
<span style="color: red">'''Troubleshooting:'''</span> <br>
* '''Program Not Uploading?'''<br>
* '''Program Not Uploading?'''<br>
Line 59: Line 58:
<br>[[File:ks0398 6-6.png|500px|frameless|thumb]]<br>
<br>[[File:ks0398 6-6.png|500px|frameless|thumb]]<br>


<br>


<br>
<br>
==Resources ==
==Resources ==
'''Download the PDF:'''<br>
'''Download the Arduino Code and PDF:'''<br>
https://drive.google.com/open?id=1Q5TVCrOW_ngd3Bmw8IShPRFzzG4UN3ye
https://drive.google.com/open?id=10luKx7DptrQL7HQWbqv09luzkSEcnx3t


'''Download the Code:'''<br>
'''Download the Mixly Code and PDF:'''<br>
https://drive.google.com/open?id=1QNum9DPLBKTnWS0_X0RPd9Vt-DMAh2dG
https://drive.google.com/open?id=1mt5oiId-4T5VWi4eEaB7Zuf-97bNwMFB


<br>
<br>


==Buy from ==
==Buy from ==
*'''Official Website:''' http://www.keyestudio.com/ks0113.html
*[https://www.keyestudio.com/new-keyestudio-easy-plug-capacitive-touch-sensor-for-arduino-starter-steam-p0088-p0088.html '''Official Website''' ]


*[https://www.aliexpress.com/store/product/New-Keyestudio-EASY-Plug-Capacitive-Touch-Sensor-for-Arduino-starter/1452162_32641589449.html?spm=2114.12010612.8148356.2.2d5b57f6LCLmWc  Shop on aliexpress ]
*[https://www.aliexpress.com/store/product/New-Keyestudio-EASY-Plug-Capacitive-Touch-Sensor-for-Arduino-starter/1452162_32641589449.html?spm=2114.12010612.8148356.2.2d5b57f6LCLmWc  Shop on aliexpress ]

Revision as of 16:37, 6 May 2019

EASY plug Capacitive Touch Sensor

Introduction

You can find touch sensors mostly on electronic device. Instead of buttons, upgrade your Arduino project with our new version touch sensor and make it cool!
The EASY Plug digital capacitive touch sensor provides a one-touch style switch on your Arduino project. It uses the most popular capacitive sensing technology which is the same as your mobile phone.
This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Even isolated by some cloth and paper, it can still feel the touch. The sensitivity will decrease as the isolation getting thick.
Note: this module should be used together with EASY plug control board.

Features

  • Connector: Easy plug
  • Supply Voltage: 3.3V to 5V
  • Sensor type: Digital
  • Function range: 0℃ to 100℃


Technical Details

  • Dimensions: 45mm*20mm*18mm
  • Weight: 4.9g


Connect It Up

Connect the EASY Plug touch sensor and LED module to control board using RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb


Upload the Code


Below is an example code.
thumb


What You Should See

Done uploading the code, when you touch the sensor, the led on the sensor will light up.
thumb

Open the monitor, it will print out the value read from the touch sensor.
thumb


Simulating Table Lamp


Test Code

thumb

What You Should See
Powered up and upload well the code, press down the button, LED light is turned on, it will not be off when release the button; But if press the button once again, LED will be turned off. It seems like your table lamp.

thumb

Open the monitor, you should be able to see how many times do you touch the sensor.
thumb


Troubleshooting:

  • Program Not Uploading?

This happens sometimes, the most likely case is a confused Board and serial port, you should firstly select your proper board and port.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.

thumb



Resources

Download the Arduino Code and PDF:
https://drive.google.com/open?id=10luKx7DptrQL7HQWbqv09luzkSEcnx3t

Download the Mixly Code and PDF:
https://drive.google.com/open?id=1mt5oiId-4T5VWi4eEaB7Zuf-97bNwMFB


Buy from