Ks0119 keyestudio EASY plug Line Tracking Sensor: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 5: Line 5:
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. <br>
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. <br>
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal. <br>
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal. <br>
<span style="color: red">'''Note: ''' this sensor needs to be used together with EASY plug control board.<br>
This sensor needs to be used together with EASY plug control board.<br>
 
<span style=color:red> '''Special Note:''' <br>
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board  with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module. </span><br>


<br>
<br>
==Specification==
==Specification==
* Connector: Easy plug
* Connector: Easy plug

Revision as of 08:52, 22 May 2019

Keyestudio EASY plug Line Tracking Sensor

Introduction

The Line Tracking Sensor can tell white from in black or black from white accurately.
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line.
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal.
This sensor needs to be used together with EASY plug control board.

Special Note:
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module.


Specification

  • Connector: Easy plug
  • Power supply: 5V
  • Operating current: <10mA
  • Operating temperature: 0℃~ 50℃
  • Output Level: TTL (Black for LOW output, White for HIGH output)
  • High quality connector


Technical Details

  • Dimensions: 57mm*16mm*18mm
  • Weight: 4.8g


Connect It Up

Connect the EASY Plug Line Tracking sensor and LED module to control board using RJ11 cables. Then connect the control board to your PC with a USB cable.
thumb


What You Should See


thumb

Done uploading the code to board, open the serial monitor and set the baud rate to 9600, then you can see the data is printed on the monitor, and will control LED on.
thumb

thumb



Resources

Download the Arduino Datasheet:
https://drive.google.com/open?id=1_5tDsf1KbADdRdkTcWfUrLYqgneSj97p

Download the Mixly Code and Datasheet:
https://drive.google.com/open?id=1VLaMIwUTnWwufEunBdFd8UHKed3E9Vse



Buy from