Ks0126 keyestudio EASY plug IR Transmitter Module

EASY plug IR Transmitter Module

Introduction

Infrared transmitting tube, also known as infrared emitting diode, belongs to the diode family. It is a light-emitting device that can directly convert electrical energy to near-infrared light and emit. Its structure and principle is similar to an LED. Only material of semiconductor is different. This module is usually used together with IR receiver module.
Note: this module needs to be used together with EASY plug control board.

Specification

• Interface: Easy plug
• Power Supply: 3-5V
• Infrared center frequency: 850nm-940nm
• Infrared emission angle: about 20degree
• Infrared emission distance: about 1.3m (5V 38Khz)
• Interface socket: JST PH2.0
• Mounting hole: inner diameter is 3.2mm, spacing is 15mm
• Size: 43.8*20mm
• Weight: 5g

Connection Diagram

Sample Code

#include <IRremote.h>
IRsend irsend;
void setup()
{
Serial.begin(9600);
}
void loop() {
irsend.sendSony(0xa90, 12); // Sony TV power code
delay(100);
}

Resources

Datasheet

http://www.keyestudio.com/files/index/download/id/1464235466/

Buy from

http://www.keyestudio.com/keyestudio-easy-plug-ir-transmitter-module-for-arduino-starter.html