Ks0139 keyestudio EASY plug I2C 8x8 LED Matrix: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 6: Line 6:
This module uses HT16K33 chip to drive an 8x8 dot matrix. Just need to use the I2C communication port of microcontroller to control the dot matrix, which can save more port resources of microcontroller.<br>
This module uses HT16K33 chip to drive an 8x8 dot matrix. Just need to use the I2C communication port of microcontroller to control the dot matrix, which can save more port resources of microcontroller.<br>
The four pin of this module is integrated into a crystal plug. All you need to do is connect the module to control board for communication using an RJ11 cable.<br>
The four pin of this module is integrated into a crystal plug. All you need to do is connect the module to control board for communication using an RJ11 cable.<br>
<span style=color:red>'''Note:''' this module should be used with EASY plug control board.<br>
This module should be used with EASY plug control board.<br>
 
<span style=color:red> '''Special Note:''' <br>
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board  with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module. </span><br>


<br>
<br>
==Specification==
==Specification==
* Interface: Easy plug
* Interface: Easy plug

Revision as of 08:58, 22 May 2019

EASY plug I2C 8x8 LED Matrix


thumb

Introduction

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix.
This module uses HT16K33 chip to drive an 8x8 dot matrix. Just need to use the I2C communication port of microcontroller to control the dot matrix, which can save more port resources of microcontroller.
The four pin of this module is integrated into a crystal plug. All you need to do is connect the module to control board for communication using an RJ11 cable.
This module should be used with EASY plug control board.

Special Note:
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module.


Specification

  • Interface: Easy plug
  • Supply voltage: 4.5V-5.5V
  • Maximum display: 16*8
  • Size: 56*32mm*18mm
  • Weight: 14.7g


Connection Diagram


thumb


Sample Code

Below is an example code. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See

Upload the code successfully, it will light up a dot light on the matrix.
thumb


Extension Experiment 1


Showing 0~5
You can upload the code below to show the number 0~5.
thumb

thumb

thumb


What You Should See
Upload the code successfully, the matrix will show the number from 0 to 5.
thumb

thumb

thumb

Extension Experiment 2


Button Controlled Heart

Hookup Guide
Connect the EASY Plug 8x8 LED Matrix module and button module to control board using RJ11 cables.
thumb


Test Code
Below is an example code.

thumb

thumb


What You Should See

thumb

Upload the code successfully, press the button, you can control the matrix show a big heart image or a small one. It seems like a beating heart.
thumb

thumb



Resources

Download the Arduino Package:
https://drive.google.com/open?id=1Y0gtLbeBBEpZdyKBKLVI2ElWlKepsCs6

Download the Mixly Package:
https://drive.google.com/open?id=1FA2s52aBBqblRlvRtvpeE2w-l2xZyBAY



Get One Now