Ks0139 keyestudio EASY plug I2C 8x8 LED Matrix

From Keyestudio Wiki
Jump to navigation Jump to search

EASY plug I2C 8x8 LED Matrix


thumb

Introduction

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix.
This module uses HT16K33 chip to drive an 8x8 dot matrix. Just need to use the I2C communication port of microcontroller to control the dot matrix, which can save more port resources of microcontroller.
The four pin of this module is integrated into a crystal plug. All you need to do is connect the module to control board for communication using an RJ11 cable.
Note: this module should be used with EASY plug control board.


Specification

  • Interface: Easy plug
  • Supply voltage: 4.5V-5.5V
  • Maximum display: 16*8
  • Size: 56*32mm*18mm
  • Weight: 14.7g


Connection Diagram


thumb


Sample Code

Below is an example code. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See

Upload the code successfully, it will light up a dot light on the matrix.
thumb


Extension Experiment 1


Showing 0~5
You can upload the code below to show the number 0~5.
thumb

thumb

thumb


What You Should See
Upload the code successfully, the matrix will show the number from 0 to 5.
thumb

thumb

thumb

Extension Experiment 2


Button Controlled Heart

Hookup Guide
Connect the EASY Plug 8x8 LED Matrix module and button module to control board using RJ11 cables.
thumb


Test Code
Below is an example code.

thumb

thumb


What You Should See

thumb

Upload the code successfully, press the button, you can control the matrix show a big heart image or a small one. It seems like a beating heart.
thumb

thumb


Resources

PDF:
https://drive.google.com/open?id=1NPtnHotb5ztewevXIGlvVul3Kmr6P3li

Download the Code:
https://drive.google.com/open?id=1cIoYUKDiiQzu_XAhz4EnBfEzkJFamHfk

Download the Library:
https://drive.google.com/open?id=17bmQlmDwRC_aGVnDdtCIM9KJJwdO9K4O

Get One Now

Official Website: http://www.keyestudio.com/ks0139.html