Ks0174 keyestudio HM-10 Bluetooth-4.0 V2

From Keyestudio Wiki
Jump to navigation Jump to search

keyestudio HM-10 Bluetooth-4.0 V2


thumb


Introduction

keyestudio HM-10 Bluetooth-4.0 V2 adopts TI CC2541 chip and configuration space of 256Kb. It supports AT command. Users can modify working mode (master/slave), baud rate, device name, paring password etc.

Specification

  • Bluetooth protocol: Bluetooth Specification V4.0 BLE
  • No byte limit in serial port Transceiving
  • In open environment, realize 100m ultra-distance communication with iphone4s
  • USB protocol: USB V2.0
  • Working frequency: 2.4GHz ISM band
  • Modulation method: GFSK(Gaussian Frequency Shift Keying)
  • Transmission power: -23dbm, -6dbm, 0dbm, 6dbm, can be modified by AT command.
  • Sensitivity: ≤-84dBm at 0.1% BER
  • Transmission rate: Asynchronous: 6K bytes
  • Synchronous: 6k Bytes
  • Security feature: Authentication and encryption
  • Supporting service: Central & Peripheral UUID FFE0, FFE1
  • Power consumption: Auto sleep mode, stand by current 400uA~800uA, 8.5mA during transmission.
  • Power supply: 5V DC
  • Working temperature: –5 to +65 Centigrade
  • Weight: 3.2g
  • Size: 46*17*5mm

Circuit Connection


thumb

Sample Code

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("keyestudio");
}
}

Result

Open APP HC-COM, click search device, select the device, device is connected; the LED on the Bluetooth module is on. Enter “a” in HC-COM, click send, Bluetooth APP will display keyestudio. Every time HC-COM sends an “a”, the Pin13 LED on the main board blinks once.
thumb

Resources

PDF File:

https://drive.google.com/open?id=1Ai-mgQf1QLKN7l4w-PJhk-g757wyT0Qb

APP HC-COM:

https://drive.google.com/open?id=18m7X9dBpNTfcAFRn1rq-3Qg6NH7HuTI3

Video:

http://www.keyestudio.com/wp/ks0174/

Get One Now