Ks0184 keyestudio Multi-purpose Shield V2: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
==keyestudio Multi-purpose Shield V2==
 
<br>[[File:ks0184.png|500px|frameless|thumb]]<br>
[[image:ks0184.png|thumb|500px|right|Keyestudio Multi-purpose Shield V2]]
 


==Introduction==
==Introduction==
Multi-purpose Shield V2 is a learning board based on Arduino. No need for soldering and connection. Download directly the program to complete experiment. It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extended ports on the shield to help you to complete other experiment. <br>
Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection.Download the program to complete experiment. <br>
It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly.  
There are extension ports on the shield to help you to complete other experiments.<br>


<br>


==Specification==
==Specification==
* Compatible with main controller on the market,such as UNO R3 and MEGA2560  
* Compatible with main controllers such as UNO R3 and MEGA2560.
* Using 6-channel LED indicator to show the working condition of program for modulating program conveniently 
* Comes with 6 LED indicators to show the program status.
* Switching functions with 3-channel keyswitch
* Comes with 3 switching buttons
* One reset button
* Comes with a reset button
* Using revolving potentiometer to do analog input
* Comes with a potentiometer for analog input
* Alarming and making sound by passive buzzer module
* Comes with a passive buzzer for alarm.
* Using 4 bit LED Segment Displays to display data
* Comes with a 4-digit LED display to show the number


==Connection Diagram==
<br>
Upload program to keyestudio UNO R3 BOARD, and plug this shield into UNO R3 BOARD.<br>
== Details ==
* Dimensions: 68mm*54mm*19mm
* Weight: 23g
<br>[[File:ks0184 Detail.png|500px|frameless|thumb]]<br>
 
<br>
==Interface Instruction ==
<br>[[File:ks0184 pinout.jpg|800px|frameless|thumb]]<br>
 
<br>
== Hookup Guide==
Simply plug the shield into UNO R3 board or MEGA 2560.
<br>[[File:ks0184-1.png|500px|frameless|thumb]]<br>
<br>[[File:ks0184-1.png|500px|frameless|thumb]]<br>


<br>
==Sample Code==
==Sample Code==
'''Download the Code:''' [http://www.keyestudio.com/files/index/download/id/1506751134/] or you can directly copy the below code.
'''Download the Code:''' <br>
You can [https://drive.google.com/open?id=1LpUd7XiidAFPeu3ngrkiamJuY1H_0vKq click here] to download the code or directly copy the code below to [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino software].


<pre>
<pre>
Line 51: Line 68:


int dat_wei[4]={0x01,0x02,0x04,0x08};    //LED Segment Displays
int dat_wei[4]={0x01,0x02,0x04,0x08};    //LED Segment Displays
showing 1--4
//showing 1--4
int dat_duan[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90}; //LED Segment Displays showing 0--9
int dat_duan[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90}; //LED Segment Displays showing 0--9
char i=0;  
char i=0;  
Line 59: Line 76:
   pinMode(clockPin,OUTPUT);
   pinMode(clockPin,OUTPUT);
   pinMode(dataPin,OUTPUT);  
   pinMode(dataPin,OUTPUT);  
 
 
   pinMode(key1,INPUT);  
   pinMode(key1,INPUT);  
   pinMode(key2,INPUT);  
   pinMode(key2,INPUT);  
   pinMode(key3,INPUT);  
   pinMode(key3,INPUT);  
 
 
   pinMode(buzzer,OUTPUT);
   pinMode(buzzer,OUTPUT);


Line 75: Line 92:
   digitalWrite(i,HIGH);     
   digitalWrite(i,HIGH);     
}
}
 
 
void loop()
void loop()
{
{
Line 94: Line 111:
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  digitalWrite(latchPin,HIGH);
  digitalWrite(latchPin,HIGH);
 
 
while(1)
while(1)
  {
  {
Line 118: Line 135:
{
{
  char i;
  char i;
 
  digitalWrite(latchPin,LOW);                        //clear LED Segment Displays
  digitalWrite(latchPin,LOW);                        //clear LED Segment Displays
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
  digitalWrite(latchPin,HIGH);
  digitalWrite(latchPin,HIGH);
 
 
  while(1)
  while(1)
  {
  {
Line 213: Line 230:
}
}
</pre>
</pre>
<br>


==Result==
==Test Result==
After powering on, indicator D1 is on, TX light on the board is blinking and indicator of LED13 is always on. Press nothing to display value of analog revolving potentiometer; press key1 to show 0-3 on LED Segment Displays; press key2 and buzzer rings; press key3 and only flowing light turns on.
Done uploading the code to the board, power on the board, you should see the 4-digit LED display the number. Shown below.<br>
<br>[[File:ks0184 Connect.png|600px|frameless|thumb]]<br>
The analog value output by potentiometer is showed on the 4-digit LED display. <br>
Press the button S3-A3, the 6 SMD LEDs will light up one by one like the flowing light, but 4-digit LED display is off.<br>
Press the button S2-A2, the passive buzzer will beep and 4-digit LED display is still off.<br>
Press the button S1-A1, 4-digit LED display will show the default number 0123.<br>
 
<br>
==Resources ==
 
'''Download the code:'''<br>
 
https://fs.keyestudio.com/KS0184
 
<br>


==Get One Now ==
==Get One Now ==
*[https://www.keyestudio.com/free-shipping-keyestudio-multi-purpose-shield-v2-w-gift-box-for-arduino-starter-p0142.html  '''Official Websie''']
*[https://www.amazon.com/KEYESTUDIO-Multi-Purpose-Shield-Arduino-MEGA2560/dp/B06XG587RG  SHOP ON Amazon ]
*[https://www.aliexpress.com/store/product/Free-shipping-keyestudio-Multi-purpose-shield-V2-for-arduino-starter/1452162_32749938764.html?spm=2114.12010612.8148356.49.53b2276fvxHh5v  SHOP ON Aliexpress ]
*[https://www.ebay.com/itm/132580476387  SHOP ON eBay]


http://www.keyestudio.com/keyestudio-multi-purpose-shield-v2.html


[[Category: Shield]]
[[Category: Shield]]

Latest revision as of 13:51, 6 January 2021

Keyestudio Multi-purpose Shield V2


Introduction

Multi-purpose Shield V1 is a learning board based on Arduino. No need for soldering and connection.Download the program to complete experiment.
It is multi-purpose and we offer code libraries of all modules that have been tested. You can use them directly. There are extension ports on the shield to help you to complete other experiments.


Specification

  • Compatible with main controllers such as UNO R3 and MEGA2560.
  • Comes with 6 LED indicators to show the program status.
  • Comes with 3 switching buttons
  • Comes with a reset button
  • Comes with a potentiometer for analog input
  • Comes with a passive buzzer for alarm.
  • Comes with a 4-digit LED display to show the number


Details

  • Dimensions: 68mm*54mm*19mm
  • Weight: 23g


thumb


Interface Instruction


thumb


Hookup Guide

Simply plug the shield into UNO R3 board or MEGA 2560.
thumb


Sample Code

Download the Code:
You can click here to download the code or directly copy the code below to Arduino software.

//pressing nothing to display value of analog revolving potentiometer
//pressing key1 to show 0-3 on LED Segment Displays
//pressing key2 and buzzer ringing
//pressing key3 and flowing light on

//defining three pins of 74HC595
int latchPin = 4;//ST_CP
int clockPin = 5;//SH_CP 
int dataPin = 2; //DS 

//defining three key input
int key1 = A1;
int key2 = A2;
int key3 = A3;

//buzzer pin
int buzzer = 3;

//pin definition of flowing light
int led1 = 13;
int led2 = 12;
int led3 = 11;
int led4 = 10;
int led5 = 9;
int led6 = 8;


int dat_wei[4]={0x01,0x02,0x04,0x08};    //LED Segment Displays
//showing 1--4
int dat_duan[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90}; //LED Segment Displays showing 0--9
char i=0; 
void setup ()
{
  pinMode(latchPin,OUTPUT);
  pinMode(clockPin,OUTPUT);
  pinMode(dataPin,OUTPUT); 

  pinMode(key1,INPUT); 
  pinMode(key2,INPUT); 
  pinMode(key3,INPUT); 

  pinMode(buzzer,OUTPUT);

  pinMode(led1,OUTPUT);
  pinMode(led2,OUTPUT);
  pinMode(led3,OUTPUT); 
  pinMode(led4,OUTPUT);
  pinMode(led5,OUTPUT);
  pinMode(led6,OUTPUT); 
  for(char i=8;i<14;i++)
   digitalWrite(i,HIGH);    
}

void loop()
{
if(digitalRead(key1)==LOW )
  SMG();                    //testing LED Segment Displays
if(digitalRead(key2)==LOW )
  buzzer_();                //testing buzzer
if(digitalRead(key3)==LOW)
  led_display();            //testing LED
if(digitalRead(key1)==HIGH & digitalRead(key2)==HIGH & digitalRead(key3)==HIGH)  
  analog();                //testing analog input
}

void SMG(void)
{
 digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 digitalWrite(latchPin,HIGH);

while(1)
 {
 digitalWrite(latchPin,LOW);
                                                       //MSBFIRST,transmitting binary bit from high to low,74HC595 starts from first piece, and displaces data from Q0 to Q7. If there is data, it will start from the second piece like this.
 shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[i]);   //data about second piece     
 shiftOut(dataPin, clockPin, MSBFIRST ,dat_wei[i]);    //way of MSBFIRST,data about first piece
 digitalWrite(latchPin,HIGH);
 i++;
 if(i==4){i=0;}
 if(digitalRead(key1)==HIGH)
 {
   digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   digitalWrite(latchPin,HIGH);
   break;
 }
 }
}

void buzzer_(void)
{
 char i;

 digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
 digitalWrite(latchPin,HIGH);

 while(1)
 {
 for(i=0;i<80;i++)// output a frequency sound
 { 
  digitalWrite(buzzer,LOW);// sound
  delay(1);//delay1ms 
  digitalWrite(buzzer,HIGH);//not sound
  delay(1);//ms delay 
 } 
 for(i=0;i<100;i++)// output a frequency sound
 { 
  digitalWrite(buzzer,LOW);// sound
  digitalWrite(buzzer,HIGH);//not sound
  delay(2);//2ms delay 
 }
 if(digitalRead(key2)==HIGH)
 {
   digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
   digitalWrite(latchPin,HIGH);
   break;
 }
 }
}

void led_display()
{
digitalWrite(latchPin,LOW);                         //clear LED Segment Displays
shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
shiftOut(dataPin, clockPin, MSBFIRST ,0x00);
digitalWrite(latchPin,HIGH);

while(1)
{
 digitalWrite(led1,LOW);
 delay(100);
 digitalWrite(led1,HIGH);
 digitalWrite(led2,LOW);
 delay(100);
 digitalWrite(led2,HIGH);
 digitalWrite(led3,LOW);
 delay(100);
 digitalWrite(led3,HIGH);
 digitalWrite(led4,LOW);
 delay(100);
 digitalWrite(led4,HIGH);
 digitalWrite(led5,LOW);
 delay(100);
 digitalWrite(led5,HIGH);
 digitalWrite(led6,LOW);
 delay(100);
 digitalWrite(led6,HIGH);
 if(digitalRead(key3)==HIGH)
 {
   break;
 }
}
}


void analog()
{
int val,qian,bai,shi,ge;
val=analogRead(A0);
qian=val/1000;
bai=val%1000;
bai=bai/100;
shi=val%100;
shi=shi/10;
ge=val%10;
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[qian]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x01);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[bai]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x02);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[shi]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x04);
digitalWrite(latchPin,HIGH);
digitalWrite(latchPin,LOW);
shiftOut(dataPin, clockPin, MSBFIRST ,dat_duan[ge]);
shiftOut(dataPin, clockPin, MSBFIRST ,0x08);
digitalWrite(latchPin,HIGH);
}


Test Result

Done uploading the code to the board, power on the board, you should see the 4-digit LED display the number. Shown below.

thumb
The analog value output by potentiometer is showed on the 4-digit LED display.
Press the button S3-A3, the 6 SMD LEDs will light up one by one like the flowing light, but 4-digit LED display is off.
Press the button S2-A2, the passive buzzer will beep and 4-digit LED display is still off.
Press the button S1-A1, 4-digit LED display will show the default number 0123.


Resources

Download the code:

https://fs.keyestudio.com/KS0184


Get One Now