Ks0251 keyestudio 4-channel Relay Shield: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 65: Line 65:


==Get One Now ==
==Get One Now ==
'''Official Website'''
'''Official Website''' <br>
 
http://www.keyestudio.com/ks0251.html
http://www.keyestudio.com/keyestudio-4-channel-relay-shield.html






[[Category: Shield]]
[[Category: Shield]]

Revision as of 08:44, 13 April 2018

Introduction

Keyestudio 4-channel relay shield will integrate 4-channel 5V relay module, which is fully compatible with keyestudio UNO R3 control board. It can work through stacking shield on the keyestudio UNO R3 control board, which is very easy and convenient. The 4-channel relay of shield is for high level effectively. And 4-channel relay control port should respectively connect with the digital port 4, 5, 6, 7 which is on the keyestudio UNO R3 control board. We only need to control the high and low level outputs of digital port 4, 5, 6, 7 on the 4-channel relay, which can achieve to control the relay switch.
thumb

Specification


1.Working Style: high level is effective.

2.Contact Capacity: AC120V /3A 
                    DC24V/3A
3.Weight: 39.4g

4.Size:69*53*27mm

5.Fully compatible with UNO R3 board

6.Indicator LED onboard for Relay output status

Package Included

1 x 4 Channel Relay Module

Sample Code


int BASE = 4 ;  //The first relay is connected to the I / O port
int NUM = 4;   //Total number of relays
void setup()
{
   for (int i = BASE; i < BASE + NUM; i ++) 
   {
     pinMode(i, OUTPUT);   //Set the number I/O port to outputs
   }
}
void loop()
{
   for (int i = BASE; i < BASE + NUM; i ++) 
   {
     digitalWrite(i, LOW);    //Set the number I/O port outputs to "low", that is, gradually turn off the relay.
     delay(200);        //delay 0.2S
   }
   for (int i = BASE; i < BASE + NUM; i ++) 
   {
     digitalWrite(i, HIGH);    //Set the number I/O port outputs to "high", that is, gradually open relay.
     delay(200);        //delay 0.2S
   }  
}

Test Result

Stacking the keyestudio 4-channel relay shield on the keyestudio UNO R3 control board, burning the program, after connecting the electricity, the 4-channel relay is first connected, and then disconnected one after another, cycle alternately.

Resources

PDF:
https://drive.google.com/open?id=1yQsuD_PZcua1JsZxNUtyzAr6BCOev5Q7

VIDEO:
http://www.keyestudio.com/wp/ks0251/

Get One Now

Official Website
http://www.keyestudio.com/ks0251.html