Ks0263 keyestudio Single Solid State Relay Module: Difference between revisions
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
<br> | <br> | ||
| Line 8: | Line 6: | ||
Solid State Relay is a new kind of contactless switching device which is composed of all solid state electronic components. Compared with the electromagnetic relay, its reliability is more higher, with the features of non-contact, long service life, fast and less outside interference. <br> | Solid State Relay is a new kind of contactless switching device which is composed of all solid state electronic components. Compared with the electromagnetic relay, its reliability is more higher, with the features of non-contact, long service life, fast and less outside interference. <br> | ||
The output control terminal of the keyestudio single solid-state relay must be connected to the circuit, and its working current needs to be bigger than 50mA, so that the solid state relay can be disconnected normally.<br> | The output control terminal of the keyestudio single solid-state relay must be connected to the circuit, and its working current needs to be bigger than 50mA, so that the solid state relay can be disconnected normally.<br> | ||
<br>[[File: | <br>[[File:Ks0263-1.png|500px|frameless|thumb]]<br> | ||
<br> | <br> | ||
| Line 27: | Line 25: | ||
| 2mA | | 2mA | ||
|} | |} | ||
* Output | <br> | ||
<br>[[File:KS0263- | |||
* Output port： AC240V/2A | |||
<br>[[File:KS0263-.jpg|500px|frameless|thumb]]<br> | |||
<br> | <br> | ||
Revision as of 16:29, 18 April 2019
Introduction
Keyestudio single solid state relay is a low level effective solid state relay, that is to say, the input control signals is the low level (0-1.5 V), the relay is on; while the input control signal is high level (3-5 V), the relay is off.
Solid State Relay is a new kind of contactless switching device which is composed of all solid state electronic components. Compared with the electromagnetic relay, its reliability is more higher, with the features of non-contact, long service life, fast and less outside interference.
The output control terminal of the keyestudio single solid-state relay must be connected to the circuit, and its working current needs to be bigger than 50mA, so that the solid state relay can be disconnected normally.
Performance Parameters
- Electrical parameters:
| Voltage | Static Current | Working Current | Trigger Voltage | Trigger Current |
|---|---|---|---|---|
| DC 5V | 0mA | 12.5mA | 0-1.5V | 2mA |
- Output port： AC240V/2A
Connection Diagram
Sample Code
int Relay = 3;
void setup()
{
pinMode(Relay, OUTPUT); //Set Pin3 as output
}
void loop()
{
digitalWrite(Relay, HIGH); //Turn off relay
delay(1000);
digitalWrite(Relay, LOW); //Turn on relay
delay(1000);
}
Result
Wiring as the above image, after powered-on, the solid state relay breaks for 1S and then connects for 1S, which is cycling alternately.
Resource
- PDF:
https://drive.google.com/open?id=1C0f5uDnMY0N0e-UlOd_acrUE6oyRlj6P
- VIDEO:
http://video.keyestudio.com/ks0263/