Ks0263 keyestudio Single Solid State Relay Module

From Keyestudio Wiki
Jump to navigation Jump to search

Keyestudio Single Solid State Relay Module

KS0263 (1).jpg

Introduction

Keyestudio single solid state relay is a low level and effective solid state relay, that is to say, the input control signals is the low level (0-1.5 V), the relay is on; while the input control signal is high level (3-5 V), the relay is off. Solid State Relay is a new kind of contactless switching device which is composed of all solid state electronic components. Compared with the electromagnetic relay, its reliability is more higher, with the features of non-contact, long service life, fast and less outside interference. The output control terminal of the keyestudio single solid-state relay must be connected to the circuit, and its working current needs to be bigger than 50mA, so that the solid state relay can be disconnected normally.

Performance Parameters

  • Electrical parameters:
Voltage Static Current Working Current Trigger Voltage Trigger Current
DC 5V 0mA 12.5mA 0-1.5V 2mA
  • Output port : AC240V/2A

Connection Diagram


thumb

Sample Code

 int Relay = 3;
  void setup()
{
  pinMode(Relay, OUTPUT);     //Set Pin3 as output
}
void loop()
{
          digitalWrite(Relay, HIGH);   //Turn off relay
          delay(1000);
          digitalWrite(Relay, LOW);    //Turn on relay
          delay(1000);
}

Result

Wiring as the above image , after power-on, the solid state relay breaks for 1S and then connects for 1S, which is cycling alternately.

Resource

Datasheet http://www.keyestudio.com/files/index/download/id/1500514074/

Buy from

http://www.keyestudio.com/keyestudio-single-solid-state-relay.html