View source for Ks0138 keyestudio EASY plug I2C 2004 LCD

==EASY plug I2C 2004 LCD==
<br>[[File:ks0138-1.png|500px|frameless|thumb]]<br>

==Introduction==
Keyestudio Easy-plug 2004 I2C Module is a 20 character by 4 line LCD display with Blue background and White backlight. The original 2004 LCD needs 7 IO ports to be up and running, ours is built with Arduino IIC/I2C interface, saving you 5 IO ports. In Easy-plug control board, one IIC interface will suffice. This LCD is ready-to-use because it is compatible with the Arduino Liquid Crystal Library.<br>
Note: this module needs to be used together with EASY plug control board.<br>

==Specification==
* Interface: Easy-plug
* Communication protocol: I2C
* I2C address: 0x27
* Operating voltage: +5V
* Contrast control: through potentiometer
* Size: 98mm*36mm
* Weight: 30g

==Connection Diagram ==
This module carries I2C interface, so we need to comply with I2C protocol in usage and corresponding head files must be included and added into the library. <br>
Below is the connection diagram between this module and Easy-plug controller:<br>
<br>[[File:ks0138-2.png|500px|frameless|thumb]]<br>


==Sample Code==
Download the libraries of Wire and LiquidCrystal_I2C: [http://www.keyestudio.com/files/index/download/id/1507706889/]
<pre>
//KEYES
//Compatible with the Arduino IDE 1.0
//Library version:1.1
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27,20,4);  // set the LCD address to 0x27 for a 16 chars and 2 line display


void setup()
{
  lcd.init();                      // initialize the lcd 
  lcd.init();
  // Print a message to the LCD.
  lcd.backlight();
  lcd.setCursor(3,0);
  lcd.print("Hello, world!");
  lcd.setCursor(2,1);
  lcd.print("Hello，keyestudio!");
   lcd.setCursor(0,2);
  lcd.print("Arduino LCM IIC 2004");
   lcd.setCursor(2,3);
  lcd.print("Power By Ec-yuan!");
}
void loop()
{
}
</pre>

Note: To ensure that this module will work properly, these two head files, namely Wire and LiquidCrystal_I2C, must be added into our library before code testing.

== Result Show ==
<br>[[File:KS0138 (2).jpg|500px|frameless|thumb]]<br>

== Resources==

'''PDF:'''

https://drive.google.com/open?id=1Om7kjqDou7feMC1eCoix8yAxIx9n_RW7

'''Download the Libraries of Wire and LiquidCrystal_I2C:'''

https://drive.google.com/open?id=1a_S1eglzvtvgv6wOz-a-dDk3QknVW6AU

== Buy From ==
'''Official Website'''

http://www.keyestudio.com/keyestudio-easy-plug-i2c-2004-lcd-module-for-arduino.html


[[Category:EASY Plug]]