View source for KS0419 keyestudio micro:bit Tactile Button Module


[[image:Ks0419-1.png|thumb|300px|right|keyestudio Tactile Button Module For BBC micro:bit]]

<br>
==Description==
This keyestudio tactile button module is fully compatible with micro:bit control board. It mainly uses a button element, which is a digital signal output device. <br>
When using, connect the module to micro:bit control board using Crocodile clip line.<br>
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are connected. G for ground; V for 3V; S for signal pin(0 1 2).<br>
When press the button, the signal end of micro:bit main board will input HIGH level signal.
<br>
<br>
== Technical Parameters ==
* Working voltage: DC 3.0-3.3V  
* Output Signal: Digital  
* Dimensions: 31mm*27mm*6.5mm  
* Weight: 1.8g  
* Environmental attributes: ROHS  

<br>[[File:Ks0419-2.png|450px|frameless|thumb]]<br>

<br>
== Connection Diagram==
[[File:Ks0419-3.png|500px|frameless|thumb]]<br>

<br>
== Source Code ==
[[File:Ks0419-4.png|500px|frameless|thumb]]<br>

<br>
== Example Result ==
Connect well the module, then send the source code to the micro:bit main board. Powered on, press the button, the micro:bit main board will show icons.<br>
[[File:Ks0419-5.png|600px|frameless|thumb]]<br>

<br>
==Resources ==
Download all relevant info. below: <br>


<br>