View source for Ks0063 keyestudio L298N Motor Driver Board Module


<br>
==keyestudio L298N Motor Driver Module==
<br>[[File:ks0063-1.png|500px|frameless|thumb]]<br>

<br>
==Introduction==
Using L298N made by ST Company as the control chip, the module has characteristics of strong driving ability, low calorific value and strong anti-interference ability.<br>
This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.<br>
Using large capacity filter capacitor, this module can follow current to protect diodes, and improve reliability.<br>

<br>
==Specification==
* Working mode: H bridge (double lines)
* Control chip: L298N (ST)
* Logical voltage: 5V
* Driving voltage: 5V-35V
* Logical current: 0mA-36mA
* Driving current: 2A (MAX single bridge)
* Storage temperature: (-20 °C)-(+135 °C)
* Maximum power: 25W

<br>
==Connection Diagram ==
<br>[[File:ks0063-2.png|700px|frameless|thumb]]<br>

<br>
==Sample Code==
<pre>
int IN1=5;
int IN2=6;
int IN3=7;
int IN4=8;
int ENA=9;
int ENB=10;
void setup()
{
 for (int i = 5; i <11; i ++) 
   {
     pinMode(i, OUTPUT);   
   }
}
void loop()
{
   // rotate CW
  digitalWrite(IN1,LOW);
  digitalWrite(IN2,HIGH);
  analogWrite(ENA,200); 
  digitalWrite(IN3,LOW);
  digitalWrite(IN4,HIGH); 
  analogWrite(ENB,200); 
  delay(1000);
  // pause for 1S
  analogWrite(ENA,0); 
  analogWrite(ENB,0); 
  delay(1000); 
  // rotate CCW
  digitalWrite(IN1,HIGH);
  digitalWrite(IN2,LOW);
 
  analogWrite(ENA,100); 
  digitalWrite(IN3,HIGH);
  digitalWrite(IN4,LOW); 
  analogWrite(ENB,100); 
  delay(1000);
  // pause for 1S
  analogWrite(ENA,0); 
  analogWrite(ENB,0); 
  delay(1000); 
}
</pre>

<br>
==Resources ==

* '''Video'''<br>
http://video.keyestudio.com/ks0063/

* '''PDF'''<br>
https://drive.google.com/open?id=1RB4unJBeXNS5dv6fbsN4aERMEHZESCWd

<br>
==Buy from ==

*[https://www.keyestudio.com/free-shipping-keyestudio-new-l298n-shield-dual-h-bridge-dc-stepper-drive-controller-board-module-for-arduino-smart-car-robot-p0194.html   '''Official Website''' ]

*[https://www.aliexpress.com/store/product/Free-shipping-L298N-Dual-Bridge-DC-stepper-Controller-Control-motor-driver-module-Board-for-arduino/1452162_2053327107.html?spm=2114.12010612.8148356.57.39941ad1Ru04A9     Aliexpress store]


[[category:Module]]