View source for Ks0019 keyestudio Passive Buzzer module

==Passive Buzzer module==
<br>[[File:ks0019-1.png|500px|frameless|thumb]]<br>

==Introduction==
We can use Arduino to make many interactive works of which the most commonly used is acoustic-optic display. All the previous experiment has something to do with LED. However, the circuit in this experiment can produce sound. Normally, the experiment is done with a buzzer or a speaker while buzzer is simpler and easier to use. The buzzer we introduced here is a passive buzzer. It cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds. We can use Arduino to code the melody of a song, which is actually quite fun and simple. <br>


==Specification==
* Working voltage: 3.3-5v 
* Interface type: digital
* Size: 30*20mm
* Weight: 4g


==Connection Diagram ==
<br>[[File:ks0019-2.png|500px|frameless|thumb]]<br>

==Sample Code==
<pre>
 int buzzer=8;//set digital IO pin of the buzzer
void setup() 
{ 
pinMode(buzzer,OUTPUT);// set digital IO pin pattern, OUTPUT to be output 
} 
void loop() 
{ unsigned char i,j;//define variable
while(1) 
{ for(i=0;i<80;i++)// output a frequency sound
{ digitalWrite(buzzer,HIGH);// sound
delay(1);//delay1ms 
digitalWrite(buzzer,LOW);//not sound
delay(1);//ms delay 
} 
for(i=0;i<100;i++)// output a frequency sound
{ 
digitalWrite(buzzer,HIGH);// sound
digitalWrite(buzzer,LOW);//not sound
delay(2);//2ms delay 
}
} 
} 
</pre>
After downloading the program, buzzer experiment is finished.


[[category:Module]]