View source for Ks0005 keyestudio MEGA ProtoShield V3 with Tiny Breadboard


[[image:ks0005.png|thumb|500px|right|Keyestudio MEGA Protoshield V3]]

==Introduction==
Keyestudio ProtoShield is particularly designed for the [http://wiki.keyestudio.com/index.php/Ks0002_keyestudio_Mega_2560_R3_Development_Board  MEGA 2560 ]. It makes it easy for you to design custom circuits and solder electronics directly on it. <br>
For convenient use, there is a large prototyping space of both connected and unconnected spaced through-holes on the shield. <br>
There is also a soldering position reserved for SMD chip on the protoshield. You can easily solder SMD ICs on the prototyping area to test them with your Arduino board. <br>
It also extends out a row of power and ground through-holes, giving enough port resources. <br>
You can even stick a tiny 170-holes breadboard (included) on the prototyping area. You can weld elements on the shield directly or connect circuits with tiny breadboard.

==Features==
* Can be plugged into the MEGA 2560 control board 
* Extends 5V, 3V and Arduino Vin pins
* Comes with a Reset button
* Comes with a power led and a D13 indicator
* Extends an ICSP interface
* Extends out all the control pins and power pins of Arduino
* Able to build the prototyping circuits matched with Arduino
* Can weld with 28PIN chip
* Includes a tiny 170-hole breadboard


==Controllers Compatible==
* [http://wiki.keyestudio.com/index.php/Ks0002_keyestudio_Mega_2560_R3_Development_Board keyestudio MEGA 2560 R3] 
* Arduino MEGA 2560 R3


==Technical Details==
* Dimensions: 106mm x 56mm x 19mm
* Weight (only MEGA protoshield): 27.2g



<br>[[Image:KS0002-1.png|700px|frameless]]<br>

'''Back View:'''
<br>[[Image:KS0002-2.png|700px|frameless]]<br>

==Pinout Instructions==
<br>[[Image:MEGA V3引脚标图.jpg|900px|frameless]]<br>

==Tiny Breadboard==
This is a solderless tiny breadboard. It has 10 columns, and 17 rows - a total of 170 tie in points. This tiny breadboard has a self-adhesive on the back.  <br>
You can stick it on the prototyping area of protoshield for solderless operation.
<br>[[Image:KS0003-3.png|700px|frameless]]<br>


==Example Use==
You can first stick the 170-tie points breadboard on the prototyping area of Proto Shield. Stack the shield onto UNO R3 board. Use several LEDs, resistors and breadboard jumper wires to build the circuit experiments.
<br>[[Image:KS0002-4.png|700px|frameless]]<br>



== Package List ==
* keyestudio MEGA ProtoShield V3 * 1pcs
* Tiny Breadboard * 1pcs
<br>[[Image:图片1-KS0005.png|800px|frameless]]<br>

==Resources ==

* '''Video：'''<br>
http://video.keyestudio.com/ks0005/

* '''PDF：'''<br>

https://fs.keyestudio.com/KS0005


<br>

==Get One Now ==

* [https://www.keyestudio.com/free-shipping-keyestudio-mega-protoshield-prototype-expansion-board-v3-for-arduinobreadboard-p0146.html  '''Official Website'''  ]

* [https://www.amazon.com/dp/B0169WHVGS   Buy from Amazon]

* [https://www.ebay.com/itm/132724563864  Buy from eBay ]

* [https://www.aliexpress.com/store/product/Free-shipping-keyes-MEGA-Proto-shield-V3-prototype-expansion-board-for-arduino/1452162_32222150761.html?spm=2114.12010612.8148356.49.3083276fvtA4DP    Buy from AliExpress] 





  [[Category: Shield]]