KS0016 Keyestudio White LED Module - Revision history

Keyestudio: /* Resources */

2021-01-08T01:08:30Z

Resources

← Older revision		Revision as of 01:08, 8 January 2021
Line 49:		Line 49:

	'''PDF and Code''' <br>		'''PDF and Code''' <br>
	https://~~drive~~.~~google~~.com/~~open?id=1R9bW1I2BBReAV3jSuhDvS1xFqgR8uzY2~~		https://fs.keyestudio.com/KS0016

	<br>		<br>

Keyestudio: /* What You Should See */

2019-04-17T03:10:53Z

What You Should See

← Older revision		Revision as of 03:10, 17 April 2019
Line 44:		Line 44:
	The LED will flash on for one second, then off for one second, repeatedly and alternately. <br>		The LED will flash on for one second, then off for one second, repeatedly and alternately. <br>
	If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board. <br>		If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board. <br>
	<br>[[File:Ks0017.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:Ks0017.png\|600px\|frameless\|thumb]]<br>

	==Resources ==		==Resources ==

Keyestudio: /* What You Should See */

2019-04-12T06:08:10Z

What You Should See

← Older revision		Revision as of 06:08, 12 April 2019
Line 44:		Line 44:
	The LED will flash on for one second, then off for one second, repeatedly and alternately. <br>		The LED will flash on for one second, then off for one second, repeatedly and alternately. <br>
	If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board. <br>		If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board. <br>
			<br>[[File:Ks0017.png\|500px\|frameless\|thumb]]<br>

	==Resources ==		==Resources ==

Keyestudio at 06:06, 12 April 2019

2019-04-12T06:06:56Z

← Older revision		Revision as of 06:06, 12 April 2019
Line 6:		Line 6:
	You can combine with other sensors to do various interactive experiments.		You can combine with other sensors to do various interactive experiments.
	You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>		You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>
	<br>[[File:Ks0016-1.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:Ks0016-1.png\|400px\|frameless\|thumb]]<br>

	<br>		<br>
Line 19:		Line 19:
	<br>		<br>
	== Connect It Up ==		== Connect It Up ==
	Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.		Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.<br>
	<br>[[File:Ks0016-2.png\|600px\|frameless\|thumb]]<br>		<br>[[File:Ks0016-2.png\|600px\|frameless\|thumb]]<br>

Keyestudio at 06:06, 12 April 2019

2019-04-12T06:06:03Z

← Older revision		Revision as of 06:06, 12 April 2019
Line 6:		Line 6:
	You can combine with other sensors to do various interactive experiments.		You can combine with other sensors to do various interactive experiments.
	You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>		You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>
	<br>[[File:Ks0016-1.png\|~~600px~~\|frameless\|thumb]]<br>		<br>[[File:Ks0016-1.png\|500px\|frameless\|thumb]]<br>

	<br>		<br>
Line 54:		Line 54:

	==Get One Now ==		==Get One Now ==
	*[https://www.keyestudio.com/~~free~~-~~shipping~~-~~keyestudio~~-~~ps2~~-~~joystick~~-~~module~~-~~compatible~~-~~with~~-~~arduino~~-~~p0468~~-~~p0468~~.html '''Get From Official Website''' ]		*[https://www.keyestudio.com/keyestudio-super-bright-emitting-color-piranha-led-module-white-p0402-p0402.html '''Get From Official Website''' ]

	*[https://www.aliexpress.com/store/product/~~Free~~-shipping-~~Dual-axis~~-XY-~~Joystick~~-~~module~~-for-Arduino/~~1452162_2053015123~~.html?spm=2114.12010615.8148356.1.~~41412b93TeG5T7 '''From Aliexpress'''~~]		*[https://www.aliexpress.com/store/product/NEW-free-shipping-Keyestudio-Piranha-LED-Module-for-Arduino/1452162_32707331634.html?spm=2114.12010615.8148356.35.50061efaJ01ywX Shop on aliexpress]


	<br>		<br>
	[[Category: Module]]		[[Category: Module]]

Keyestudio at 06:01, 12 April 2019

2019-04-12T06:01:23Z

← Older revision		Revision as of 06:01, 12 April 2019
Line 23:		Line 23:

	<br>		<br>

	== Upload the Code ==		== Upload the Code ==
	Copy and paste below code to Arduino IDE and upload.		Copy and paste below code to Arduino IDE and upload.
Line 41:		Line 42:
	<br>		<br>
	== What You Should See ==		== What You Should See ==
	The LED will flash on for one second, then off for one second, repeatedly and alternately.		The LED will flash on for one second, then off for one second, repeatedly and alternately. <br>
	If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.		If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board. <br>


			==Resources ==

			'''PDF and Code''' <br>
	https://drive.google.com/open?id=1R9bW1I2BBReAV3jSuhDvS1xFqgR8uzY2		https://drive.google.com/open?id=1R9bW1I2BBReAV3jSuhDvS1xFqgR8uzY2

			<br>

			==Get One Now ==
			*[https://www.keyestudio.com/free-shipping-keyestudio-ps2-joystick-module-compatible-with-arduino-p0468-p0468.html '''Get From Official Website''' ]

			*[https://www.aliexpress.com/store/product/Free-shipping-Dual-axis-XY-Joystick-module-for-Arduino/1452162_2053015123.html?spm=2114.12010615.8148356.1.41412b93TeG5T7 '''From Aliexpress''']


			<br>
			[[Category: Module]]

Keyestudio at 05:59, 12 April 2019

2019-04-12T05:59:52Z

← Older revision		Revision as of 05:59, 12 April 2019
Line 6:		Line 6:
	You can combine with other sensors to do various interactive experiments.		You can combine with other sensors to do various interactive experiments.
	You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>		You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>
			<br>[[File:Ks0016-1.png\|600px\|frameless\|thumb]]<br>

	<br>		<br>
Line 19:		Line 20:
	== Connect It Up ==		== Connect It Up ==
	Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.		Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.
			<br>[[File:Ks0016-2.png\|600px\|frameless\|thumb]]<br>

			<br>

	== Upload the Code ==		== Upload the Code ==
	Copy and paste below code to Arduino IDE and upload.		Copy and paste below code to Arduino IDE and upload.

Keyestudio: /* What You Should See */

2019-04-12T05:50:41Z

What You Should See

← Older revision		Revision as of 05:50, 12 April 2019
Line 42:		Line 42:
	The LED will flash on for one second, then off for one second, repeatedly and alternately.		The LED will flash on for one second, then off for one second, repeatedly and alternately.
	If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.		If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.


			https://drive.google.com/open?id=1R9bW1I2BBReAV3jSuhDvS1xFqgR8uzY2

Keyestudio at 05:49, 12 April 2019

2019-04-12T05:49:51Z

← Older revision		Revision as of 05:49, 12 April 2019
Line 2:		Line 2:
	<br>		<br>
	== Introduction ==		== Introduction ==
	This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white light color.		This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white light color.<br>
	The pin pitch of 3Pin is 2.54mm.		The pin pitch of 3Pin is 2.54mm. This LED module has 3 Pins; - pin is connected to ground, + pin is connected to VCC（3.3-5V）, S pin is for signal control; you can set the High or Low level to control the LED on and off. <br>
	This LED module has 3 Pins; - pin is connected to ground, + pin is connected to VCC（3.3-5V）, S pin is for signal control; you can set the High or Low level to control the LED on and off.
	You can combine with other sensors to do various interactive experiments.		You can combine with other sensors to do various interactive experiments.
	You can also choose other LED modules to emit different light color like blue, green, yellow and red.		You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>


			<br>
	== Features ==		== Features ==
	~~Control~~ interface: Digital		* Control interface: Digital
	~~Working~~ voltage: DC 3.3-5V		* Working voltage: DC 3.3-5V
	~~Pin~~ pitch: 2.54mm		* Pin pitch: 2.54mm
	~~LED~~ color: white		* LED color: white
	~~Easy~~ to use		* Easy to use
	~~Useful~~ for light projects		* Useful for light projects

	~~Technical Details~~		<br>
	~~Dimensions: 34mm20mm11.5mm~~		== Connect It Up ==
	~~Weight: 2.7g~~

	Connect It Up
	Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.		Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.



	Upload the Code		== Upload the Code ==
	Copy and paste below code to Arduino IDE and upload.		Copy and paste below code to Arduino IDE and upload.
	~~////////////////////////////////////////////////////////////////////////////////////////~~		<pre>
	int led = 7;		int led = 7;
	void setup()		void setup()
Line 40:		Line 36:
	delay(1000);		delay(1000);
	}		}
	/~~///////////////////////////////////////////////////////////////////////////////////////~~		</pre>


	What You Should See		<br>
			== What You Should See ==
	The LED will flash on for one second, then off for one second, repeatedly and alternately.		The LED will flash on for one second, then off for one second, repeatedly and alternately.
	If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.		If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.

Keyestudio: Created page with "
== Introduction == This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white..."

2019-04-12T05:47:37Z

Created page with " <br> == Introduction == This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white..."

New page

<br>
== Introduction ==
This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white light color.
The pin pitch of 3Pin is 2.54mm.
This LED module has 3 Pins; - pin is connected to ground, + pin is connected to VCC（3.3-5V）, S pin is for signal control; you can set the High or Low level to control the LED on and off.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like blue, green, yellow and red.

== Features ==
Control interface: Digital
Working voltage: DC 3.3-5V
Pin pitch: 2.54mm
LED color: white
Easy to use
Useful for light projects

Technical Details
Dimensions: 34mm*20mm*11.5mm
Weight: 2.7g

Connect It Up
Connect the LED module to control board using three jumper wires. Then connect the control board to your PC with a USB cable.

Upload the Code
Copy and paste below code to Arduino IDE and upload.
////////////////////////////////////////////////////////////////////////////////////////
int led = 7;
void setup()
{
  pinMode(led, OUTPUT);     //Set Pin7 as output
}
void loop()
{ digitalWrite(led, HIGH);   //Turn off led
          delay(1000);
          digitalWrite(led, LOW);    //Turn on led
          delay(1000);
}
////////////////////////////////////////////////////////////////////////////////////////

What You Should See
The LED will flash on for one second, then off for one second, repeatedly and alternately.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.

KS0016 Keyestudio White LED Module - Revision history

Keyestudio: /* Resources */

Keyestudio: /* What You Should See */

Keyestudio: /* What You Should See */

Keyestudio at 06:06, 12 April 2019

Keyestudio at 06:06, 12 April 2019

Keyestudio at 06:01, 12 April 2019

Keyestudio at 05:59, 12 April 2019

Keyestudio: /* What You Should See */

Keyestudio at 05:49, 12 April 2019

Keyestudio: Created page with " == Introduction == This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white..."

Keyestudio: Created page with "
== Introduction == This is a white LED module. The main function is to control a plugin LED on and off. When connecting to ARDUINO, after programming, it will emit white..."