KS0216 keyestudio RPI GPS Shield - Revision history

Keyestudio: /* Get One Now */

2021-04-27T02:43:17Z

Get One Now

← Older revision		Revision as of 02:43, 27 April 2021
Line 110:		Line 110:

	*[https://www.aliexpress.com/store/product/2017-NEW-Keyestudio-RPI-GPS-Shield-for-Raspberry-Pi/1452162_32782759458.html?spm=2114.12010612.8148356.25.6e9660ffsewRl7 '''Shop on aliexpress''' ]		*[https://www.aliexpress.com/store/product/2017-NEW-Keyestudio-RPI-GPS-Shield-for-Raspberry-Pi/1452162_32782759458.html?spm=2114.12010612.8148356.25.6e9660ffsewRl7 '''Shop on aliexpress''' ]

			https://fs.keyestudio.com/KS0216



	[[category:Raspberry Pi]]		[[category:Raspberry Pi]]

Keyestudio: /* Documents */

2021-01-07T01:33:07Z

Documents

← Older revision		Revision as of 01:33, 7 January 2021
Line 106:		Line 106:
	<br>		<br>

	~~== Documents==~~
	* '''PDF File:''' <br>
	~~https://drive.google.com/open?id=1uxf3U7ERvRNOyrey_tGYdyeTpCjTqRyh~~


	~~<br>~~
	== Get One Now ==		== Get One Now ==
	*[https://www.keyestudio.com/keyestudio-neo-6m-gps-shield-expansion-board-with-antenna-for-raspberry-pi-3-ce-certification-p0054-p0054.html '''Official website''' ]		*[https://www.keyestudio.com/keyestudio-neo-6m-gps-shield-expansion-board-with-antenna-for-raspberry-pi-3-ce-certification-p0054-p0054.html '''Official website''' ]

Keyestudio: /* Usage */

2019-04-17T08:27:16Z

Usage

Keyestudio: /* Usage */

2019-04-17T08:24:46Z

Usage

← Older revision		Revision as of 08:24, 17 April 2019
Line 29:		Line 29:
	'''Step by step as shown below：'''<br>		'''Step by step as shown below：'''<br>

	1).There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>		1) There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>
	Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>		Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>
	* '''sudo vi /boot/config.txt''' <br>		* '''sudo vi /boot/config.txt''' <br>
Line 40:		Line 40:

	<br>		<br>
	2. To enable the serial console, you need to edit the '''/boot/cmdline.txt''' file: <br>		2) To enable the serial console, you need to edit the '''/boot/cmdline.txt''' file: <br>
	Change the file to the following: <br>		Change the file to the following: <br>
	* '''console=ttyAMA0,115200''' <br>		* '''console=ttyAMA0,115200''' <br>
Line 47:		Line 47:

	<br>		<br>
	3.Edit '''/lib/systemd/system/hciuart.server''' <br>		3) Edit '''/lib/systemd/system/hciuart.server''' <br>
	Change the file to the following: <br>		Change the file to the following: <br>
	'''ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -''' <br>		'''ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -''' <br>
Line 54:		Line 54:

	<br>		<br>
	4. Reboot the RPi <br>		4) Reboot the RPi <br>
	* '''sudo reboot''' <br>		* '''sudo reboot''' <br>

Keyestudio: /* Usage */

2019-04-17T08:24:09Z

Usage

← Older revision		Revision as of 08:24, 17 April 2019
Line 28:		Line 28:
	<br>		<br>
	'''Step by step as shown below：'''<br>		'''Step by step as shown below：'''<br>
	1. There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>
			1).There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>
	Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>		Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>
	* '''sudo vi /boot/config.txt''' <br>		* '''sudo vi /boot/config.txt''' <br>
	Add at the end of the file: <br>		Add at the end of the file: <br>
	* dtoverlay=pi3-miniuart-bt <br>		* dtoverlay=pi3-miniuart-bt <br>
Line 46:		Line 47:

	<br>		<br>
	3.Edit /lib/systemd/system/hciuart.server <br> Change the file to the following:<br>		3.Edit '''/lib/systemd/system/hciuart.server''' <br>
	ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -<br>		Change the file to the following: <br>
			'''ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -''' <br>
	<br>[[File:ks0216-8.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-8.png\|700px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-9.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-9.png\|700px\|frameless\|thumb]]<br>

	<br>		<br>
	4. Reboot the RPi <br>		4. Reboot the RPi <br>

Keyestudio: /* Usage */

2019-04-17T08:22:48Z

Usage

← Older revision		Revision as of 08:22, 17 April 2019
Line 42:		Line 42:
	Change the file to the following: <br>		Change the file to the following: <br>
	* '''console=ttyAMA0,115200''' <br>		* '''console=ttyAMA0,115200''' <br>
	<br>[[File:ks0216-6.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:ks0216-6.png\|700px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-7.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:ks0216-7.png\|700px\|frameless\|thumb]]<br>

	<br>		<br>
	3.Edit /lib/systemd/system/hciuart.server<br>		3.Edit /lib/systemd/system/hciuart.server <br> Change the file to the following:<br>
	Change the file to the following:<br>
	ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -<br>		ExecStart=/usr/bin/hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -<br>
	<br>[[File:ks0216-8.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-8.png\|700px\|frameless\|thumb]]<br>

Keyestudio: /* Usage */

2019-04-17T08:21:51Z

Usage

← Older revision		Revision as of 08:21, 17 April 2019
Line 27:		Line 27:

	<br>		<br>
	Step by step as shown below：<br>		'''Step by step as shown below：'''<br>
	1. There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>		1. There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>
	Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>		Add device tree to /boot/config.txt to disable the Raspberry Pi 3 bluetooth:<br>
Line 102:		Line 102:

	<br>		<br>

	== Documents==		== Documents==
	* '''PDF File:''' <br>		* '''PDF File:''' <br>

Keyestudio at 08:20, 17 April 2019

2019-04-17T08:20:54Z

Show changes

Keyestudio: /* Features */

2017-11-29T01:18:15Z

Features

← Older revision		Revision as of 01:18, 29 November 2017
Line 8:		Line 8:
	*Using active GPS antenna.<br>		*Using active GPS antenna.<br>
	*With 40 pins, convenient to connect external devices.<br>		*With 40 pins, convenient to connect external devices.<br>
	*Comes with screws, nuts, copper pillars, easy to fix in Raspberry Pi.<br>		*Comes with screws, nuts, copper pillars, easy to fix on Raspberry Pi.<br>

	== Connection Method ==		== Connection Method ==

Keyestudio: /* Usage */

2017-11-29T01:15:19Z

Usage

← Older revision		Revision as of 08:27, 17 April 2019
Line 19:		Line 19:
	<br>		<br>
	==Usage==		==Usage==
	'''a.''' We use raspberry pi official system (2017-01-11-raspbian-jessie-lite), using SSH to log in, and you need to place a ssh file in the root directory.<br>		'''A.''' We use raspberry pi official system (2017-01-11-raspbian-jessie-lite), using SSH to log in, and you need to place a ssh file in the root directory.<br>
	<br>[[File:ks0216-3.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-3.png\|700px\|frameless\|thumb]]<br>

	<br>		<br>
	'''b.''' Bluetooth and Debug share the same serial port together and, but you can just use BT or Debug on one time. <br>		'''B.''' Bluetooth and Debug share the same serial port together and, but you can just use BT or Debug on one time. <br>
	For the Raspberry Pi 3 you need to explicitly enable the serial port on the GPIO pins. The reason for this is a change with the Pi 3 to use the hardware serial port for Bluetooth and instead of a slightly different software's serial port for the GPIO pins. <br>		For the Raspberry Pi 3 you need to explicitly enable the serial port on the GPIO pins. The reason for this is a change with the Pi 3 to use the hardware serial port for Bluetooth and instead of a slightly different software's serial port for the GPIO pins. <br>
	A side effect of this change is that the serial port will actually change speed as the Pi CPU clock throttles up and down--this will unfortunately cause problems for most serial devices like GPS receivers! <br>		A side effect of this change is that the serial port will actually change speed as the Pi CPU clock throttles up and down--this will unfortunately cause problems for most serial devices like GPS receivers! <br>
Line 58:		Line 59:

	<br>		<br>
	'''c.''' Write '''sudo raspi-config''' in the terminal，select '''Advanced Options ---> Serial ---> disable''' to close serial port debugging.<br>		'''C.''' Write '''sudo raspi-config''' in the terminal，select '''Advanced Options ---> Serial ---> disable''' to close serial port debugging.<br>
	<br>[[File:ks0216-10.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-10.png\|700px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-11.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-11.png\|700px\|frameless\|thumb]]<br>
Line 66:		Line 67:

	<br>		<br>
	'''d.''' Reboot the Pi <br>		'''D.''' Reboot the Pi <br>
	* '''sudo reboot''' <br>		* '''sudo reboot''' <br>

	<br>		<br>
	'''e.''' A great way to test out the serial port is to use the minicom program. When installing it, you may sometimes can’t find download path of source code. So you can write '''cd /etc/apt''' in the terminal, and then edit '''sudo vi sources.list''' to modify address. <br>		'''E.''' A great way to test out the serial port is to use the minicom program. When installing it, you may sometimes can’t find download path of source code. So you can write '''cd /etc/apt''' in the terminal, and then edit '''sudo vi sources.list''' to modify address. <br>
	<br>[[File:ks0216-15.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-15.png\|700px\|frameless\|thumb]]<br>
	<br>		<br>
Line 79:		Line 80:
	<br>		<br>
	Save your change and exit. Write sudo apt-get update in the terminal to update.<br>		Save your change and exit. Write sudo apt-get update in the terminal to update.<br>
	<br>[[File:ks0216-18.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:ks0216-18.png\|700px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-19.png\|~~500px~~\|frameless\|thumb]]<br>		<br>[[File:ks0216-19.png\|700px\|frameless\|thumb]]<br>

	<br>		<br>
	'''f.''' You can install Minicom using the following command: <br>		'''F.''' You can install Minicom using the following command: <br>
	* '''sudo apt-get install minicom''' <br>		* '''sudo apt-get install minicom''' <br>
	<br>[[File:ks0216-20.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-20.png\|700px\|frameless\|thumb]]<br>
Line 89:		Line 90:

	<br>		<br>
	'''g.''' You can then use Minicom to send and receive data over the serial port:<br>		'''G.''' You can then use Minicom to send and receive data over the serial port:<br>
	*'''minicom -b 9600 -o -D /dev/ttyAMA0''' <br>		*'''minicom -b 9600 -o -D /dev/ttyAMA0''' <br>
	'''-b''' to set baud rate, the same as that of module; <br>		'''-b''' to set baud rate, the same as that of module; <br>
Line 98:		Line 99:

	<br>		<br>
	'''h.''' '''Ctrl+A''' , press '''Q''' to exit.<br>		'''H.''' '''Ctrl+A''' , press '''Q''' to exit.<br>
	<br>[[File:ks0216-24.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-24.png\|700px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-25.png\|700px\|frameless\|thumb]]<br>		<br>[[File:ks0216-25.png\|700px\|frameless\|thumb]]<br>

← Older revision		Revision as of 01:15, 29 November 2017
Line 15:		Line 15:

	==Usage==		==Usage==
	a. We use raspberry pi official system (2017-01-11-raspbian-jessie-lite), using SSH to log in, and you need to place a ssh file in the root directory .		'''a.''' We use raspberry pi official system (2017-01-11-raspbian-jessie-lite), using SSH to log in, and you need to place a ssh file in the root directory .
	<br>[[File:ks0216-3.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-3.png\|500px\|frameless\|thumb]]<br>

	b. Bluetooth and Debug share the same serial port together and, but you can just use BT or Debug on one time. For the Raspberry Pi 3 you need to explicitly enable the serial port on the GPIO pins. The reason for this is a change with the Pi 3 to use the hardware serial port for Bluetooth and instead use a slightly different software serial port for the GPIO pins. A side effect of this change is that the serial port will actually change speed as the Pi CPU clock throttles up and down--this will unfortunately cause problems for most serial devices like GPS receivers! <br>		'''b.''' Bluetooth and Debug share the same serial port together and, but you can just use BT or Debug on one time. For the Raspberry Pi 3 you need to explicitly enable the serial port on the GPIO pins. The reason for this is a change with the Pi 3 to use the hardware serial port for Bluetooth and instead use a slightly different software serial port for the GPIO pins. A side effect of this change is that the serial port will actually change speed as the Pi CPU clock throttles up and down--this will unfortunately cause problems for most serial devices like GPS receivers! <br>
	Step by step as shown below：<br>		Step by step as shown below：<br>
	1. There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>		1. There is now a device tree file called pi3-miniuart-bt which makes the Raspberry Pi 3 disable the Bluetooth and map pl011 UART on pins 14 and 15 as before.<br>
Line 44:		Line 44:
	4. Reboot the RPi<br>		4. Reboot the RPi<br>
	sudo reboot<br>		sudo reboot<br>
	c. Write sudo raspi-config in the terminal，select Advanced Options ---> Serial ---> disable to close serial port debugging.<br>		'''c.''' Write sudo raspi-config in the terminal，select Advanced Options ---> Serial ---> disable to close serial port debugging.<br>
	<br>[[File:ks0216-10.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-10.png\|500px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-11.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-11.png\|500px\|frameless\|thumb]]<br>
Line 50:		Line 50:
	<br>[[File:ks0216-13.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-13.png\|500px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-14.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-14.png\|500px\|frameless\|thumb]]<br>
	d. Reboot the Pi<br>		'''d.''' Reboot the Pi<br>
	sudo reboot<br>		sudo reboot<br>

	e. A great way to test out the serial port is to use the minicom program. When installing it, you may sometimes can’t find download path of source code. So you can write cd /etc/apt in the terminal, and then edit sudo vi sources.list to modify address.<br>		'''e.''' A great way to test out the serial port is to use the minicom program. When installing it, you may sometimes can’t find download path of source code. So you can write cd /etc/apt in the terminal, and then edit sudo vi sources.list to modify address.<br>
	<br>[[File:ks0216-15.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-15.png\|500px\|frameless\|thumb]]<br>

Line 65:		Line 65:
	<br>[[File:ks0216-19.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-19.png\|500px\|frameless\|thumb]]<br>

	f. You can install Minicom using the following command :<br>		'''f.''' You can install Minicom using the following command :<br>
	sudo apt-get install minicom<br>		sudo apt-get install minicom<br>
	<br>[[File:ks0216-20.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-20.png\|500px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-21.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-21.png\|500px\|frameless\|thumb]]<br>

	g. You can then use Minicom to send and receive data over the serial port :<br>		'''g.''' You can then use Minicom to send and receive data over the serial port :<br>
	minicom -b 9600 -o -D /dev/ttyAMA0<br>		minicom -b 9600 -o -D /dev/ttyAMA0<br>
	-b to set baud rate, the same as that of module;-o dis-initialized Mode and an unlock file；-D define interface.<br>		-b to set baud rate, the same as that of module;-o dis-initialized Mode and an unlock file；-D define interface.<br>
Line 76:		Line 76:
	<br>[[File:ks0216-23.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-23.png\|500px\|frameless\|thumb]]<br>

	h. Ctrl+A , press Q to exit.<br>		'''h.''' Ctrl+A , press Q to exit.<br>
	<br>[[File:ks0216-24.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-24.png\|500px\|frameless\|thumb]]<br>
	<br>[[File:ks0216-25.png\|500px\|frameless\|thumb]]<br>		<br>[[File:ks0216-25.png\|500px\|frameless\|thumb]]<br>