KS0298 Keyestudio quick connectors Motor Drive Shield - Revision history

Keyestudio: /* Resource */

2021-03-05T01:08:50Z

Resource

← Older revision		Revision as of 01:08, 5 March 2021
Line 132:		Line 132:

	== Resource ==		== Resource ==
	https://~~drive~~.~~google~~.com/~~open?id=10si_unM2RKvRQ9pdxGdxtGYJfcymryJS~~
			https://fs.keyestudio.com/KS0298

Keyestudio: /* Resource */

2019-07-08T09:09:24Z

Resource

← Older revision		Revision as of 09:09, 8 July 2019
Line 136:		Line 136:


			<br>

	[[Category: Shield]]		[[Category: Shield]]

Keyestudio: /* Test Result */

2019-07-08T09:09:11Z

Test Result

← Older revision		Revision as of 09:09, 8 July 2019
Line 126:		Line 126:
	Stack well the drive shield onto UNO R3 board, and upload the above code to the board, then press down the POWER button. <br>		Stack well the drive shield onto UNO R3 board, and upload the above code to the board, then press down the POWER button. <br>
	The 2 motors simulate the motion of smart car. Go forward for one second, backward for one second, and then turn left for one second, turn right for one second and stop one second, alternately repeating.		The 2 motors simulate the motion of smart car. Go forward for one second, backward for one second, and then turn left for one second, turn right for one second and stop one second, alternately repeating.
	<br>[[File:Motor 2.jpg\|~~600px~~\|frameless\|thumb]]<br>		<br>[[File:Motor 2.jpg\|550px\|frameless\|thumb]]<br>


	<br>		<br>

	== Resource ==		== Resource ==
	https://drive.google.com/open?id=10si_unM2RKvRQ9pdxGdxtGYJfcymryJS		https://drive.google.com/open?id=10si_unM2RKvRQ9pdxGdxtGYJfcymryJS

Keyestudio: /* Hookup Guide */

2019-07-08T09:08:49Z

Hookup Guide

← Older revision		Revision as of 09:08, 8 July 2019
Line 43:		Line 43:
	<br>		<br>
	== Hookup Guide==		== Hookup Guide==
	<br>[[File:KS0435-5.png\|~~600px~~\|frameless\|thumb]]<br>		<br>[[File:KS0435-5.png\|650px\|frameless\|thumb]]<br>


	<br>		<br>

	== Motor state settings ==		== Motor state settings ==
	<br>[[File:Ks0298-6.png\|600px\|frameless\|thumb]]<br>		<br>[[File:Ks0298-6.png\|600px\|frameless\|thumb]]<br>

Keyestudio at 09:07, 8 July 2019

2019-07-08T09:07:31Z

← Older revision		Revision as of 09:07, 8 July 2019
Line 1:		Line 1:

	[[image:Ks0298-1.png\|thumb\|~~600x~~\|right\|Keyestudio quick connectors Motor Drive Shield ]]		[[image:Ks0298-1.png\|thumb\|800x\|right\|Keyestudio quick connectors Motor Drive Shield ]]

	<br>		<br>
Line 12:		Line 12:

	For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>		For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>
	[[File:Ks0298-3.png\|~~600px~~\|frameless\|thumb]]		[[File:Ks0298-3.png\|550px\|frameless\|thumb]]

	The Bluetooth interface on the motor driver shield is fully compatible with keyestudio Bluetooth module. When connecting, just plug Bluetooth module into the corresponding interface. <br>		The Bluetooth interface on the motor driver shield is fully compatible with keyestudio Bluetooth module. When connecting, just plug Bluetooth module into the corresponding interface. <br>
Line 20:		Line 20:
	The shield comes with 4 fixing holes of 3mm, easy to mount on other devices.		The shield comes with 4 fixing holes of 3mm, easy to mount on other devices.

	<br>[[File:Ks0298-2.png\|~~600px~~\|frameless\|thumb]]<br>		<br>[[File:Ks0298-2.png\|550px\|frameless\|thumb]]<br>

Keyestudio at 09:06, 8 July 2019

2019-07-08T09:06:34Z

← Older revision		Revision as of 09:06, 8 July 2019
Line 9:		Line 9:
	We have designed the motor driver shield based on the L298P circuit. <br>		We have designed the motor driver shield based on the L298P circuit. <br>
	The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor.<br>		The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor.<br>
	Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, press the '''POWER button''', to supply the power for both keyestudio motor driver shield V2 and UNO R3 board. <br>		Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, press the '''POWER button''', to supply the power for both keyestudio motor driver shield and UNO R3 board. <br>

	For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>		For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>
Line 17:		Line 17:

	At the same time, the motor drive shield has brought out extra digital and analog ports in '''2.54mm pin headers''', so that you can continue to add other sensors for experiments extension. <br>		At the same time, the motor drive shield has brought out extra digital and analog ports in '''2.54mm pin headers''', so that you can continue to add other sensors for experiments extension. <br>
	The motor drive shield can access to 4 DC motors. The motor connector A and A1, connector B and B1 are separately in parallel, with the same motion ~~rule~~. <br>		The motor drive shield can access to 4 DC motors. The motor connector A and A1, connector B and B1 are separately in parallel, with the same motion law. <br>
	The shield comes with 4 fixing holes of 3mm, easy to mount on other devices.		The shield comes with 4 fixing holes of 3mm, easy to mount on other devices.

Line 24:		Line 24:

	<br>		<br>

	== Technical Details ==		== Technical Details ==
	* Logic part input voltage: DC5V		* Logic part input voltage: DC5V
Line 49:		Line 48:
	<br>		<br>
	== Motor state settings ==		== Motor state settings ==
	<br>[[File:~~KS0435~~-4.png\|~~800px~~\|frameless\|thumb]]<br>		<br>[[File:Ks0298-6.png\|600px\|frameless\|thumb]]<br>


Line 126:		Line 125:
	Stack well the drive shield onto UNO R3 board, and upload the above code to the board, then press down the POWER button. <br>		Stack well the drive shield onto UNO R3 board, and upload the above code to the board, then press down the POWER button. <br>
	The 2 motors simulate the motion of smart car. Go forward for one second, backward for one second, and then turn left for one second, turn right for one second and stop one second, alternately repeating.		The 2 motors simulate the motion of smart car. Go forward for one second, backward for one second, and then turn left for one second, turn right for one second and stop one second, alternately repeating.
	<br>[[File:~~KS0435-4~~.~~png~~\|~~800px~~\|frameless\|thumb]]<br>		<br>[[File:Motor 2.jpg\|600px\|frameless\|thumb]]<br>


	<br>		<br>
	== Resource ==		== Resource ==
	~~<br>~~		https://drive.google.com/open?id=10si_unM2RKvRQ9pdxGdxtGYJfcymryJS

Keyestudio: /* Overview */

2019-07-08T09:01:31Z

Overview

← Older revision		Revision as of 09:01, 8 July 2019
Line 9:		Line 9:
	We have designed the motor driver shield based on the L298P circuit. <br>		We have designed the motor driver shield based on the L298P circuit. <br>
	The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor.<br>		The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor.<br>
	Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, ~~turn~~ the ~~Slide~~ button ON, to supply the power for both keyestudio motor driver shield V2 and UNO R3 board. <br>		Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, press the '''POWER button''', to supply the power for both keyestudio motor driver shield V2 and UNO R3 board. <br>

	For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>		For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. <br>
Line 24:		Line 24:

	<br>		<br>

	== Technical Details ==		== Technical Details ==
	* Logic part input voltage: DC5V		* Logic part input voltage: DC5V

Keyestudio at 08:51, 8 July 2019

2019-07-08T08:51:43Z

Show changes

Keyestudio: Created page with " Keyestudio quick connectors Motor Drive Shield
== Overview == There are many ways to drive the motor. Our robot uses the most..."

2019-07-08T08:43:27Z

Created page with " thumb|700x|right|Keyestudio quick connectors Motor Drive Shield == Overview == There are many ways to drive the motor. Our robot uses the most..."

New page

[[image:KS0435-3.png|thumb|700x|right|Keyestudio quick connectors Motor Drive Shield ]]

 
== Overview ==
There are many ways to drive the motor. Our robot uses the most commonly used L298P solution. 
L298P is an excellent high-power motor driver IC produced by STMicroelectronics. It can directly drive DC motors, two-phase and four-phase stepping motors. The driving current up to 2A, and output terminal of motor adopts eight high-speed Schottky diodes as protection. 

We have designed the motor driver shield based on the L298P circuit. 
The stackable design can make it be plugged directly into the Arduino, reducing the technical difficulty of using and driving the motor. 
Direct stack the motor driver shield onto UNO R3 board, after the BAT is powered on, turn the Slide button ON, to supply the power for both keyestudio motor driver shield V2 and UNO R3 board. 

For simple wiring, the motor driver shield comes with '''anti-reverse PH2.0-(2P/3P/4P/ 5P) interfaces'''. When connecting the motor, power supply and sensor modules, you just need to plug in directly. 

The Bluetooth interface on the motor driver shield is fully compatible with keyestudio Bluetooth module. When connecting, just plug Bluetooth module into the corresponding interface. 

At the same time, the motor drive shield has brought out extra digital and analog ports in '''2.54mm pin headers''', so that you can continue to add other sensors for experiments extension. 
The motor drive shield can access to 4 DC motors. The motor connector A and A1, connector B and B1 are separately in parallel, with the same motion rule. 
The shield comes with 4 fixing holes of 3mm, easy to mount on other devices.

 [[File:KS0435-2.png|600px|frameless|thumb]] 

 
== Technical Details ==
* Logic part input voltage: DC5V
* Driving part input voltage: DC 7-12V
* Logic part working current: <36mA
* Driving part working current: <2A
* Maximum power dissipation: 25W (T=75℃)
* Working temperature: -25℃～＋130℃
* White connector: PH2.0- (2P/3P/4P/ 5P)
* Pin/female header spacing:2.54mm
* Fixing hole diameter: 3mm

 
== PINOUT Diagram ==
 [[File:KS0435-4.png|800px|frameless|thumb]] 

 
== Hookup Guide==
 [[File:KS0435-5.png|600px|frameless|thumb]] 

 
== Test Code ==
<pre>
void setup(){
pinMode(4, OUTPUT);
pinMode(2, OUTPUT);
}

void loop(){
digitalWrite(4,HIGH);
analogWrite(5,100);
digitalWrite(2,HIGH);
analogWrite(9,100);
delay(2000);
digitalWrite(4,LOW);
analogWrite(5,100);
digitalWrite(2,LOW);
analogWrite(9,100);
delay(2000);
digitalWrite(4,LOW);
analogWrite(5,100);
digitalWrite(2,HIGH);
analogWrite(9,100);
delay(2000);
digitalWrite(4,HIGH);
analogWrite(5,100);
digitalWrite(2,LOW);
analogWrite(9,100);
delay(2000);
analogWrite(5,0);
analogWrite(9,0);
delay(2000);
}
</pre>

 
== Test Result ==
Done wiring, stack the motor drive shield onto the UNO control board; connect UNO to computer’s USB port with USB cable to upload the code. 
Upload success, turn the Slide switch ON; 2 motors will simulate the smart car movement. Turn forward for 2 seconds, backward for 2 seconds, and then rotate to left for 2 seconds, rotate to right for 2 seconds, stop for 2 seconds, alternately and circularly. 

 
== Resource ==

https://drive.google.com/open?id=1upaMVPVRjMjo9RGnhfdJh01JSdnL4EUN

 

==Get One Now ==

*[ Official website]

*[ Get one now on aliexpress store]

[[Category: Shield]]

KS0298 Keyestudio quick connectors Motor Drive Shield - Revision history

Keyestudio: /* Resource */

Keyestudio: /* Resource */

Keyestudio: /* Test Result */

Keyestudio: /* Hookup Guide */

Keyestudio at 09:07, 8 July 2019

Keyestudio at 09:06, 8 July 2019

Keyestudio: /* Overview */

Keyestudio at 08:51, 8 July 2019

Keyestudio: Created page with " Keyestudio quick connectors Motor Drive Shield == Overview == There are many ways to drive the motor. Our robot uses the most..."

Keyestudio: Created page with " Keyestudio quick connectors Motor Drive Shield
== Overview == There are many ways to drive the motor. Our robot uses the most..."