Keyestudio: /* Resources */

2021-01-06T02:13:56Z

Resources

← Older revision		Revision as of 02:13, 6 January 2021
Line 240:		Line 240:

	==Resources==		==Resources==
	*'''Download all the information here:'''<br>
	~~https://drive.google.com/open?id=1BJfE7iDjP90HFWB0TplixKrP7npOh3rh~~

	*'''Driver package download:~~''' <br>~~		More detailed files in the link:
	https://~~www~~.~~silabs~~.com/~~products/development-tools/software/usb-to-uart-bridge-vcp-drivers~~
			https://fs.keyestudio.com/KS0389

	*'''Download the PDF:''' <br>
	~~https://drive.google.com/open?id=1XuxabtIUwI1DNec8jtOeyNRA5fNb6u50~~

	<br>		<br>

Keyestudio: /* Detailed Using Method as follows */

2019-04-29T09:04:57Z

Detailed Using Method as follows

← Older revision		Revision as of 09:04, 29 April 2019
Line 45:		Line 45:
	https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x		https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x

	<span style="color: red">'''Note: ''' ~~</span>~~ this control board is only compatible with Arduino 1.6.5 version or latest. <br>		<span style="color: red">'''Note: ''' this control board is only compatible with Arduino 1.6.5 version or latest. <br>
	In the following, we will download the Arduino 1.6.5 version. </span><br>		In the following, we will download the Arduino 1.6.5 version. </span><br>
	<br>[[Image:ks0389 Step1-1.png\|600px\|frameless]]<br>		<br>[[Image:ks0389 Step1-1.png\|600px\|frameless]]<br>

Keyestudio: /* Detailed Using Method as follows */

2019-04-29T09:04:34Z

Detailed Using Method as follows

← Older revision		Revision as of 09:04, 29 April 2019
Line 46:		Line 46:

	<span style="color: red">'''Note: ''' </span> this control board is only compatible with Arduino 1.6.5 version or latest. <br>		<span style="color: red">'''Note: ''' </span> this control board is only compatible with Arduino 1.6.5 version or latest. <br>
	In the following, we will download the Arduino 1.6.5 version.		In the following, we will download the Arduino 1.6.5 version. </span><br>
	<br>[[Image:ks0389 Step1-1.png\|600px\|frameless]]<br>		<br>[[Image:ks0389 Step1-1.png\|600px\|frameless]]<br>

Keyestudio: /* Get One Now */

2019-04-18T03:48:45Z

Get One Now

← Older revision		Revision as of 03:48, 18 April 2019
Line 257:		Line 257:


	[[Category: ~~Module~~]]		[[Category: Board]]

Keyestudio: /* Get One Now */

2019-04-18T03:48:34Z

Get One Now

← Older revision		Revision as of 03:48, 18 April 2019
Line 252:		Line 252:

	==Get One Now==		==Get One Now==
	*'''Official website:''' ~~http~~://www.~~keyestudio~~.com/~~ks0389~~.html		*[https://www.keyestudio.com/keyestudio-esp8266-wi-fi-module-shield-1m-micro-usb-cable-for-arduino-chip-is-cp2102-gmr-p0508-p0508.html '''Official website''' ]

			*[https://www.aliexpress.com/store/product/NEW-Keyeastudio-NodeMcu-Lua-ESP8266-ESP-12F-WIFI-Module-1M-USB-Cable-Development-Board-Compatible-with/1452162_32668574859.html?spm=2114.12010615.8148356.1.6ee877f1Rg6xH0 Shop on aliexpress ]


	[[Category: Module]]		[[Category: Module]]

Keyestudio: Created page with " Keyestudio ESP8266 WiFi board ==Description== This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module..."

2019-03-19T08:46:18Z

Created page with " thumb|500px|right|Keyestudio ESP8266 WiFi board ==Description== This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module..."

New page

[[image:ks0389.png|thumb|500px|right|Keyestudio ESP8266 WiFi board]]

==Description==
This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module developed by Ai-Thinker. 
The processor ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a smaller package, with 16-bit Lite mode. The main frequency supports 80MHz and 160 MHz. 
It supports RTOS, integrated with Wi-Fi MAC/BB/RF/PA/LNA. Onboard comes with curved antenna. 
This development board is a standalone network controller, which can add networking function to those existing devices. 
When using, power the board and upload the program via a Micro USB port, and the current supply should be 2A.
 [[Image:ks0389-1.png|400px|frameless]] 
 

==Technical Details==
* Microcontroller: ESP8266-12F WIFI Module
* USB to Serial Chip: CP2102-GMR
* Operating Voltage: DC5V
* Input Current: 2A
* Main frequency supports 80 MHz and 160 MHz
* Analog Input Pins: 1(A0)
* Micro USB cable: 1m
* Dimensions: 49mm*26mm*12mm
 [[Image:ks0389-2.png|600px|frameless]] 

 

==Element and Interfaces==
Here is an explanation of what every element and interface of the board has:
 [[Image:ks0389-3.png|600px|frameless]] 

 
==Specialized Functions of Some Pins==
* Serial communication pins: RX and TX
* SPI communication pins: CLK(CLK); SD0(MIS0); CMD(MOSI); SD1(INT).
* SD Card communication pins: D3(SD3); D2(SD2); D1(SD1); CMD(CMD); D0(SD0); CLK(CLK).
* Analog output pin: A0
* GPIO pins: D0(GPIO16); D1(GPIO5); D2(GPIO4); D3(GPIO0); D4(GPIO2); D5(GPIO14); D6(GPIO12); D7(GPIO13); D8(GPIO15); RX(GPIO3); TX(GPIO1); SD3(GPIO10); SD2(GPIO9)

 
==Detailed Using Method as follows==
===Step1| Install the Arduino IDE===
When programming the control board, first you should install the Arduino software and driver. 
You can download the different versions for different systems from the link below: 
https://www.arduino.cc/en/Main/OldSoftwareReleases#1.5.x

'''Note: ''' this control board is only compatible with Arduino 1.6.5 version or latest. 
In the following, we will download the Arduino 1.6.5 version.
 [[Image:ks0389 Step1-1.png|600px|frameless]] 

In this Windows system page, there are two options. One is Windows version, the other is Windows Installer. 
For Windows Installer, you can download the installation file, this way you need to install the arduino IDE.
 [[Image:ks0389 Step1-2.png|600px|frameless]] 

For simple Windows version, you can download the software directly, do not need to install, just directly use the software after unzip the file.
 [[Image:ks0389 Step1-3.png|600px|frameless]] 

Next, we click the Windows, pop up the interface as below.
 [[Image:KS0313-5.png|600px|frameless]] 

Click '''JUST DOWNLOAD'''. 
When the ZIP file is downloaded well to your computer, you can directly unzip the file. Open the Arduino-1.6.5-r5 folder, you should get it as follows.[[Image:ks0389 Step1-4.png|400px|frameless]] 
 [[Image:ks0389 Step1-5.png|600px|frameless]] 

Click the icon of ARDUINO software to open it. This is your Arduino.
 [[Image:ks0389 Step1-6.png|600px|frameless]] 
 

===Step2| Install the Driver===
The USB to serial port chip of this control board is '''CP2102-GMR'''. So you need to install the driver for the chip. 
You can click the driver package download link here. 
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

You can download the driver software for different systems.
 [[Image:ks0389 Step2-1.png|600px|frameless]] 

For example, download for Windows 7, you can get the driver package '''CP210x_Windows_Drivers.'''
 [[Image:ks0389 Step2-2.png|600px|frameless]] 

Unzip the package to install the driver.
 [[Image:ks0389 Step2-3.png|600px|frameless]] 

Then double click '''CP210xVCPInstaller_x64''' to install the driver. Shown below.
 [[Image:ks0389 Step2-4.png|600px|frameless]] [[Image:ks0389 Step2-5.png|600px|frameless]]
 [[Image:ks0389 Step2-6.png|600px|frameless]] [[Image:ks0389 Step2-7.png|600px|frameless]] 

 
===Step3| Install the ESP8266 with Arduino===
Double-click the icon of Arduino software downloaded well, you will get the interface shown below.
 [[Image:Ks0313图片1.png|600px|frameless]] 
('''Note: ''' if the Arduino software loads in the wrong language, you can change it in the preferences dialog. See [https://www.arduino.cc/en/Guide/Environment-Languages the environment page] for details.)
 [[Image:Ks0389 Step1-6.png|600px|frameless]] 

The functions of each button on the Toolbar are listed below:
 [[Image:IDE.png|600px|frameless]] 

{| class="wikitable" cellpadding="1" cellspacing="1"
|-
!scope="row" |[[Image:IDE 1.png|600px|frameless]] Verify/Compile
| Check the code for errors
|-
!scope="row" |[[Image:IDE 2.png|600px|frameless]] Upload
| Upload the current Sketch to the Arduino
|-
!scope="row" |[[Image:IDE 3.png|600px|frameless]] New
| Create a new blank Sketch
|-
! scope="row" |[[Image:IDE 4.png|600px|frameless]] Open
| Show a list of Sketches
|-
! scope="row" |[[Image:IDE 5.png|600px|frameless]] Save
| Save the current Sketch
|-
! scope="row" |[[Image:IDE 6.png|600px|frameless]] Serial Monitor
| Display the serial data being sent from the Arduino
|-
|}
 

Firstly, plug one end of your USB cable into the Keyestudio ESP8266 WI-FI module and the other into a USB socket on your computer.
 [[Image:ks0389 Step3-3.png|600px|frameless]] 

Then open the Arduino IDE, click the “File” to select the “Preferences”.
 [[Image:ks0389 Step3-2.png|600px|frameless]] 

The pop-up interface is shown below. 
See the “Additional Boards Manager URLs”, copy and paste the link below:
http://arduino.esp8266.com/stable/package_esp8266com_index.json

and then click OK.
 [[Image:ks0389 Step3-4.png|600px|frameless]] 

After that, click “Tools”, for “Board”, enter the Boards Manager, it will automatically download the relevant file. Shown below.
 [[Image:ks0389 Step3-5.png|600px|frameless]] 

Pop up the following window:
 [[Image:ks0389 Step3-6.png|600px|frameless]] 

Done downloading the relevant file, it will pop up the window below. 
Then enter the 8266 on the blank bar and click Install.
 [[Image:ks0389 Step3-7.png|600px|frameless]] [[Image:ks0389 Step3-8.png|600px|frameless]] 

Installation completed, click Close, then click “Tools”, for “Board”, you should see the '''NodeMCU 1.0 (ESP-12E Module)'''. Shown below.
 [[Image:ks0389 Step3-9.png|600px|frameless]] 

 

===Step4| Add the Libraries===
Before upload the code to test your board, you should first add the library ESP8266WiFi into the libraries folder of Arduino-1.6.5-r5. 
You can click the link to download the library needed. 
https://drive.google.com/open?id=1_Y5lKCrDgY3AeovXZKorQ8FVk2olUOOL
 [[Image:ks0389 Step4-1.png|600px|frameless]] 

'''Note: ''' 
Before adding the library, you have opened the Arduino IDE. After add the library successfully, must restart the IDE, so the library can work.

 
===Step5| Select the Board and Serial Port===
Open the Arduino IDE, you’ll need to click the “Tools”, then select the Board and the Serial Port.
 [[Image:ks0389 Step3-9.png|600px|frameless]] 

You can check out the Serial Port on your computer’s Device Manager. 
Select your proper COM Port.
 [[Image:ks0389 Step5-1.png|600px|frameless]] [[Image:ks0389 Step5-1.png|600px|frameless]] 

 
===Step6| Upload the Code===
Add well the libraries mentioned above, and select the proper Board and Port, you should upload the code to test the module. 
Below is an example code, you can copy and paste it on Arduino IDE.
<pre>
/*
* This sketch demonstrates how to scan WiFi networks.
* The API is almost the same as with the WiFi Shield library,
* the most obvious difference being the different file you need to include:
*/
#include "ESP8266WiFi.h"

void setup() {
Serial.begin(115200);

// Set WiFi to station mode and disconnect from an AP if it was previously connected
WiFi.mode(WIFI_STA);
WiFi.disconnect();
delay(100);

Serial.println("Setup done");
}

void loop() {
Serial.println("scan start");

// WiFi.scanNetworks will return the number of networks found
int n = WiFi.scanNetworks();
Serial.println("scan done");
if (n == 0)
Serial.println("no networks found");
else
{
Serial.print(n);
Serial.println(" networks found");
for (int i = 0; i < n; ++i)
{
// Print SSID and RSSI for each network found
Serial.print(i + 1);
Serial.print(": ");
Serial.print(WiFi.SSID(i));
Serial.print(" (");
Serial.print(WiFi.RSSI(i));
Serial.print(")");
Serial.println((WiFi.encryptionType(i) == ENC_TYPE_NONE)?" ":"*");
delay(10);
}
}
Serial.println("");

// Wait a bit before scanning again
delay(5000);
}
</pre>

After copy and paste the code on IDE, click the compile button, if compiling successfully, the message "Done compiling." will appear in the status bar.
 [[Image:ks0389 Step6-1.png|600px|frameless]] [[Image:ks0389 Step6-2.png|600px|frameless]] 

Then click the “Upload” button, if the upload is successful, the message "Done uploading." will appear in the status bar.
 [[Image:ks0389 Step6-3.png|600px|frameless]] [[Image:ks0389 Step6-4.png|600px|frameless]] 

 
===Step7| What Should You See===
Done uploading the code, open the serial monitor and set the baud rate to 115200, you should see all the WIFI information.
 [[Image:ks0389 Step7-1.png|800px|frameless]] 
 

==Package Includes==
* Keyestudio ESP8266 WI-FI board* 1
* USB cable * 1
 [[Image:ks0389.png|600px|frameless]] 

 

==Resources==
*'''Download all the information here:''' 
https://drive.google.com/open?id=1BJfE7iDjP90HFWB0TplixKrP7npOh3rh

*'''Driver package download:''' 
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

*'''Download the PDF:''' 
https://drive.google.com/open?id=1XuxabtIUwI1DNec8jtOeyNRA5fNb6u50

 

==Get One Now==
*'''Official website:''' http://www.keyestudio.com/ks0389.html

[[Category: Module]]

KS0389 keyestudio ESP8266 WiFi Development Board - Revision history

Keyestudio: /* Resources */

Keyestudio: /* Detailed Using Method as follows */

Keyestudio: /* Detailed Using Method as follows */

Keyestudio: /* Get One Now */

Keyestudio: /* Get One Now */

Keyestudio: Created page with " Keyestudio ESP8266 WiFi board ==Description== This keyestudio ESP8266 WI-FI development board is based on the ESP8266-12FWIFI module..."