Ks0051 keyestudio Infrared Obstacle Avoidance Sensor - Revision history

Keyestudio: /* Resources */

2021-01-07T06:13:24Z

Resources

← Older revision		Revision as of 06:13, 7 January 2021
Line 63:		Line 63:

	* '''PDF and Code'''<br>		* '''PDF and Code'''<br>
	https://~~drive~~.~~google~~.com/~~open?id=1dicKKpdPXE0EfLD2m8D7Q38NwCKvK7hV~~		https://fs.keyestudio.com/KS0051

Keyestudio at 06:05, 4 June 2019

2019-06-04T06:05:14Z

← Older revision		Revision as of 06:05, 4 June 2019
Line 29:		Line 29:

	==Sample Code ==		==Sample Code ==

	<pre>		<pre>
	const int sensorPin = 2; // the number of the sensor pin		const int sensorPin = 3; // the number of the sensor pin
	const int ledPin = 13; // the number of the LED pin		const int ledPin = 13; // the number of the LED pin
	int sensorState = 0; // variable for reading the sensor status		int sensorState = 0; // variable for reading the sensor status
Line 55:		Line 54:
	If we put a foam block in front of the sensor, this time when sensor detects the obstacle, sled on the sensor will be turned on.<br>		If we put a foam block in front of the sensor, this time when sensor detects the obstacle, sled on the sensor will be turned on.<br>
	<br>[[File:KS0349 10-3.png\|500px\|frameless\|thumb]]<br>		<br>[[File:KS0349 10-3.png\|500px\|frameless\|thumb]]<br>


	<br>		<br>

Keyestudio: /* Connection Diagram */

2019-06-04T05:54:56Z

Connection Diagram

← Older revision		Revision as of 05:54, 4 June 2019
Line 24:		Line 24:
	<br>		<br>
	==Connection Diagram ==		==Connection Diagram ==
	<br>[[File:~~Ks0051-1~~.png\|700px\|frameless\|thumb]]<br>		<br>[[File:0051.png\|700px\|frameless\|thumb]]<br>

	<br>		<br>

	==Sample Code ==		==Sample Code ==

Keyestudio: /* Resources */

2019-04-19T00:42:18Z

Resources

← Older revision		Revision as of 00:42, 19 April 2019
Line 61:		Line 61:
	http://video.keyestudio.com/ks0051/		http://video.keyestudio.com/ks0051/

	* '''PDF'''<br>		* '''PDF and Code'''<br>
	https://drive.google.com/open?id=~~19HbFiYtTGCL12pJj5BLl44H5_ABt_wyr~~		https://drive.google.com/open?id=1dicKKpdPXE0EfLD2m8D7Q38NwCKvK7hV


	<br>		<br>

	==Buy from==		==Buy from==

Keyestudio: /* Buy from */

2019-04-15T06:53:38Z

Buy from

← Older revision		Revision as of 06:53, 15 April 2019
Line 70:		Line 70:
	*[https://www.keyestudio.com/free-shipping-keyestudio-ir-infrared-obstacle-avoidance-sensor-module-for-arduino-robot-car-p0159.html '''Official Website''']		*[https://www.keyestudio.com/free-shipping-keyestudio-ir-infrared-obstacle-avoidance-sensor-module-for-arduino-robot-car-p0159.html '''Official Website''']

	*[https://www.aliexpress.com/store/product/Free-shipping-intelligent-barrowload-sensor-infrared-sensor-photoelectric-switch-for-arduino/1452162_2053067205.html?spm=2114.12010612.8148356.7.52862462ZM2AO8 Shop on aliexpress]		*[https://www.aliexpress.com/store/product/Free-shipping-intelligent-barrowload-sensor-infrared-sensor-photoelectric-switch-for-arduino/1452162_2053067205.html?spm=2114.12010612.8148356.7.52862462ZM2AO8 '''Shop on aliexpress''']


	[[Category: Sensor]]		[[Category: Sensor]]

Keyestudio at 06:53, 15 April 2019

2019-04-15T06:53:08Z

← Older revision		Revision as of 06:53, 15 April 2019
Line 1:		Line 1:

			<br>
	==Introduction==		==Introduction==
	Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed for wheeled robots. ~~This~~ sensor has strong adaptability to ambient light and is of high precision. It has a pair of infrared transmitting and receiving tube. When infrared ray launched by the transmitting tube encounters an obstacle (its reflector), the infrared ray is reflected to the receiving tube, and the indicator will light up ~~and~~ signal output interface outputs digital signal. We can adjust the detection distance through the potentiometer knob ( effective distance: 2～40cm, working Voltage: 3.3V-5V ). ~~Thanks~~ to a wide voltage range, this sensor can work steadily even under fluctuating power supply voltage and is suitable for the use of various micro-controllers, ~~Arduino~~ controllers and BS2 controllers. A robot mounted with the sensor can sense changes in the environment.		Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed for wheeled robots. <br>
			This sensor has strong adaptability to ambient light and is of high precision. It has a pair of infrared transmitting and receiving tube.
			When infrared ray launched by the transmitting tube encounters an obstacle (its reflector), the infrared ray is reflected to the receiving tube, and the indicator will light up; the signal output interface outputs digital signal. <br>

			We can adjust the detection distance through the potentiometer knob (effective distance: 2～40cm, working Voltage: 3.3V-5V ). <br>
			Thanks to a wide voltage range, this sensor can work steadily even under fluctuating power supply voltage and is suitable for the use of various micro-controllers,Arduino controllers and BS2 controllers.
			A robot mounted with the sensor can sense changes in the environment.<br>
	<br>[[File:KS0051 obstacle detector.png\|500px\|frameless\|thumb]]<br>		<br>[[File:KS0051 obstacle detector.png\|500px\|frameless\|thumb]]<br>

			<br>
	==Specification==		==Specification==
	*Working ~~Voltage~~: DC 3.3V-5V		* Working voltage: DC 3.3V-5V
	*Working ~~Current~~: ≥20mA		* Working current: ≥20mA
	*Working ~~Temperature~~: ~~－10℃—＋50℃~~		* Working temperature: －10℃ to＋50℃
	*Detection ~~Distance~~: 2-40cm		* Detection distance: 2-40cm
	*IO Interface: 4 ~~wire interface~~ (-/+/S/EN)		* IO Interface: 4 PIN (-/+/S/EN)
	*Output ~~Signal~~: TTL voltage		* Output signal: TTL voltage
	*Accommodation ~~Mode~~: Multi-circle resistance regulation		* Accommodation mode: Multi-circle resistance regulation
	*Effective Angle: 35°		* Effective Angle: 35°
	Size: 41.716.7mm
	*Weight: 5g

			<br>
	==Connection Diagram ==		==Connection Diagram ==
			<br>[[File:Ks0051-1.png\|700px\|frameless\|thumb]]<br>

	<br>~~[[File:522.png\|500px\|frameless\|thumb]]<br>~~		<br>

	==Sample Code ==		==Sample Code ==

Line 41:		Line 49:
	</pre>		</pre>

			<br>
			== Result ==
			Done uploading the code to board, you can see the led on both UNO board and obstacle detector sensor is turned on.<br>
			If we put a foam block in front of the sensor, this time when sensor detects the obstacle, sled on the sensor will be turned on.<br>
			<br>[[File:KS0349 10-3.png\|500px\|frameless\|thumb]]<br>

			<br>
	==Resources ==		==Resources ==

	'''Video'''		* '''Video'''<br>
			http://video.keyestudio.com/ks0051/

	~~http~~://~~www~~.~~keyestudio~~.com/~~wp/ks0051/~~		* '''PDF'''<br>
			https://drive.google.com/open?id=19HbFiYtTGCL12pJj5BLl44H5_ABt_wyr

	~~'''PDF'''~~

	https://~~drive~~.~~google~~.com/~~open?id=19HbFiYtTGCL12pJj5BLl44H5_ABt_wyr~~		<br>
			==Buy from==

			*[https://www.keyestudio.com/free-shipping-keyestudio-ir-infrared-obstacle-avoidance-sensor-module-for-arduino-robot-car-p0159.html '''Official Website''']

	=~~Buy from=~~		*[https://www.aliexpress.com/store/product/Free-shipping-intelligent-barrowload-sensor-infrared-sensor-photoelectric-switch-for-arduino/1452162_2053067205.html?spm=2114.12010612.8148356.7.52862462ZM2AO8 Shop on aliexpress]
	~~'''Official Website'''~~

	~~http://www.keyestudio.com/keyestudio-infrared-obstacle-avoidance-sensor-for-arduino.html~~

	[[Category: Sensor]]		[[Category: Sensor]]

Keyestudio: /* Sample Code */

2018-06-12T00:40:03Z

Sample Code

← Older revision		Revision as of 00:40, 12 June 2018
Line 37:		Line 37:
	else {		else {
	digitalWrite(ledPin, LOW);		digitalWrite(ledPin, LOW);
	}</pre>		}
			}
			</pre>

	==Resources ==		==Resources ==

Keyestudio: /* Introduction */

2018-05-02T05:05:12Z

Introduction

← Older revision		Revision as of 05:05, 2 May 2018
Line 1:		Line 1:
	==Introduction==		==Introduction==
	Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed for wheeled robots. This sensor has strong adaptability to ambient light and is of high precision. It has a pair of infrared transmitting and receiving tube. When infrared ray launched by the transmitting tube encounters an obstacle (its reflector), the infrared ray is reflected to the receiving tube, and the indicator will light up~~; the~~ signal output interface outputs digital signal. We can adjust the detection distance through the potentiometer knob ( effective distance: 2～40cm, working Voltage: 3.3V-5V ). Thanks to a wide voltage range, this sensor can work steadily even under fluctuating power supply voltage and is suitable for the use of various micro-controllers, Arduino controllers and BS2 controllers. A robot mounted with the sensor can sense changes in the environment.		Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed for wheeled robots. This sensor has strong adaptability to ambient light and is of high precision. It has a pair of infrared transmitting and receiving tube. When infrared ray launched by the transmitting tube encounters an obstacle (its reflector), the infrared ray is reflected to the receiving tube, and the indicator will light up and signal output interface outputs digital signal. We can adjust the detection distance through the potentiometer knob ( effective distance: 2～40cm, working Voltage: 3.3V-5V ). Thanks to a wide voltage range, this sensor can work steadily even under fluctuating power supply voltage and is suitable for the use of various micro-controllers, Arduino controllers and BS2 controllers. A robot mounted with the sensor can sense changes in the environment.
	<br>[[File:~~511~~.png\|500px\|frameless\|thumb]]<br>		<br>[[File:KS0051 obstacle detector.png\|500px\|frameless\|thumb]]<br>


	==Specification==		==Specification==

Keyestudio: /* Resources */

2018-04-19T05:28:14Z

Resources

← Older revision		Revision as of 05:28, 19 April 2018
Line 44:		Line 44:
	'''Video'''		'''Video'''

	http://www.keyestudio.com/wp/~~2016/05/ks0052-keyestudio-pir-motion-sensor-module~~/		http://www.keyestudio.com/wp/ks0051/

	'''PDF'''		'''PDF'''

Keyestudio: /* Buy from */

2017-11-14T08:27:41Z

Buy from

← Older revision		Revision as of 08:27, 14 November 2017
Line 51:		Line 51:

	=Buy from=		=Buy from=
			'''Official Website'''

	http://www.keyestudio.com/keyestudio-infrared-obstacle-avoidance-sensor-for-arduino.html		http://www.keyestudio.com/keyestudio-infrared-obstacle-avoidance-sensor-for-arduino.html

	[[Category: Sensor]]		[[Category: Sensor]]