Ks0142 keyestudio SIM900 GSM/GPRS Module Shield - Revision history

Keyestudio: /* Resources */

2021-01-06T07:11:05Z

Resources

← Older revision		Revision as of 07:11, 6 January 2021
Line 173:		Line 173:

	==Resources ==		==Resources ==
	~~'''PDF Download:'''<br>~~
	~~https://drive.google.com/open?id=1jOILOgDrelbZg6sHrxSgydIBUHy1sb-j~~

	'''Code ~~Download~~:'''<br>		'''Download Code:'''<br>
	https://~~drive~~.~~google~~.com/~~open?id=1p-eUKA1HjQ418mcrCXMeoK9Hrkm9NzYm~~
			https://fs.keyestudio.com/KS0142

	'''VIDEO:'''<br>		'''VIDEO:'''<br>

Keyestudio: /* 2) For adding serial ports RXD(D6) and TXD(D7): send text */

2020-10-14T02:17:57Z

2) For adding serial ports RXD(D6) and TXD(D7): send text

← Older revision		Revision as of 02:17, 14 October 2020
Line 83:		Line 83:
	<br>		<br>

	===2) For adding serial ports RXD(D6) and TXD(D7): send text===		===2) For adding serial ports RXD(D0) and TXD(D1): send text===
	<pre>		<pre>
	void sendMeg()		void sendMeg()

Keyestudio: /* 3)For adding serial ports RXD(D6) and TXD(D7): call up */

2019-08-30T00:40:56Z

3)For adding serial ports RXD(D6) and TXD(D7): call up

← Older revision		Revision as of 00:40, 30 August 2019
Line 122:		Line 122:
	<br>		<br>

	===3)For adding serial ports RXD(D6) and TXD(D7): call up===		===3) For adding serial ports RXD(D6) and TXD(D7): call up===

	<pre>		<pre>

Keyestudio: /* Resources */

2019-08-30T00:38:06Z

Resources

← Older revision		Revision as of 00:38, 30 August 2019
Line 176:		Line 176:
	https://drive.google.com/open?id=1jOILOgDrelbZg6sHrxSgydIBUHy1sb-j		https://drive.google.com/open?id=1jOILOgDrelbZg6sHrxSgydIBUHy1sb-j

	'''~~Code_for_default_serial_port~~:'''<br>		'''Code Download:'''<br>
	https://drive.google.com/open?id=~~1vnyUdZL12Jh5WaFYfS4kfoZyODk2eY7m~~		https://drive.google.com/open?id=1p-eUKA1HjQ418mcrCXMeoK9Hrkm9NzYm

	~~'''Code_for_adding_serial_port:'''<br>~~
	~~https://drive.google.com/open?id=1y2WVPyqmO7KDBWEGNg8XuhUEt-0WLtT7~~

	~~'''Code_for_adding_serial_ports_RXD_D6_and_TXD_D7_:'''<br>~~
	~~https://drive.google.com/open?id=1qFHgPQGK-7waHJYH~~-~~S0agM6fgLO6fUkM~~

	'''VIDEO:'''<br>		'''VIDEO:'''<br>

Keyestudio: /* 2) For adding serial ports RXD(D6) and TXD(D7): send text */

2019-08-30T00:26:49Z

2) For adding serial ports RXD(D6) and TXD(D7): send text

← Older revision		Revision as of 00:26, 30 August 2019
Line 85:		Line 85:
	===2) For adding serial ports RXD(D6) and TXD(D7): send text===		===2) For adding serial ports RXD(D6) and TXD(D7): send text===
	<pre>		<pre>
	~~#include <SoftwareSerial.h>~~		void sendMeg()
	~~SoftwareSerial SIM900(6, 7); // define serial port PIN~~		{
	void ~~SIM900_Start~~()		Serial.println("AT");
	{
	~~digitalWrite~~(~~9, HIGH~~);
	delay(2000);		delay(2000);
	~~digitalWrite~~(~~9, LOW~~);		Serial.println("AT+CMGF=1");
	delay(~~5000~~);		delay(2000);
			Serial.println("AT+CMGS=\"15812345678\"");//change into your phone number
			delay(2000);
			Serial.print("ABCDEFGHIJKLMN\r\n");//write the content here
			delay(2000);
			Serial.write(0x1A);
			}
			void setup() {
			// put your setup code here, to run once:
			Serial.begin(9600);
	}		}
	void ~~Call_Phone~~()		void loop() {
	{		// put your main code here, to run repeatedly:
	~~SIM900.println("ATD15812345678;");~~ // ~~the numbers behind ATD is~~ your ~~phone number~~ to ~~dial.~~		delay(15*1000);
	delay(~~100);~~		sendMeg();
	~~SIM900.println("ATD15812345678;");~~
	~~delay(30000); // wait for 30 seconds...~~
	~~SIM900.println("ATH"~~); ~~// hang up~~
	}
	~~void setup()~~
	{
	~~pinMode(9, OUTPUT);~~
	~~SIM900.begin(19200); //set baud rate~~
	~~SIM900_Start();~~
	~~delay(20000); // wait for SIM900 to work~~
	}
	~~void loop()~~
	{
	~~Call_Phone();~~
	do
	{
	}
	~~while~~(1);
	}		}
	</pre>		</pre>

	<br>		<br>
	<span style="color: red">''' Code to Note:''' <br>		<span style="color: red">''' Code to Note:''' <br>
	'''1.''' ~~In the code, it will use the library '''SoftwareSerial.h''', you don't need to add it because the software IDE comes with this library~~.<br>		'''1.''' Serial.println("AT+CMGS=\"15812345678\"");//change into your phone number<br>
	'''2.''' ~~In the code '''SIM900~~.~~println~~("~~ATD15812345678;~~")~~''', you can change~~ the ~~phone number you want to dial.~~		'''2.''' Serial.print("ABCDEFGHIJKLMN\r\n");//write the content here

	<br>		<br>
	'''Test Result:'''<br>		'''Test Result:'''<br>
	Done uploading the code, insert the SIM card into SIM900 GSM/GPRS shield, and then install the antenna, as well as stack the shield onto UNO R3 board.<br>		Done uploading the code, insert the SIM card into SIM900 GSM/GPRS shield, and then install the antenna, as well as stack the shield onto UNO R3 board.<br>
	Power the UNO R3 board, the PWR LED on the shield lights; long press the SIM900-POWER button, waiting the Stable LED and NET LED light up; release the SIM900-POWER button, wait for a minute, your phone will receive the message sent from SIM900.~~<br>~~		Power the UNO R3 board, the PWR LED on the shield lights; long press the SIM900-POWER button, waiting the Stable LED and NET LED light up; release the SIM900-POWER button, wait for a minute, your phone will receive the message sent from SIM900.

	<br>[[File:图片.jpg\|400px\|frameless\|thumb]]<br>		<br>[[File:图片.jpg\|400px\|frameless\|thumb]]<br>

Keyestudio: /* 1) For default serial ports RXD(D0) and TXD(D1):call up */

2019-05-15T08:03:18Z

1) For default serial ports RXD(D0) and TXD(D1):call up

← Older revision		Revision as of 08:03, 15 May 2019
Line 72:		Line 72:
	<br>		<br>
	<span style="color: red">''' Code to Note:'''<br>		<span style="color: red">''' Code to Note:'''<br>
	In the code '''Serial.print("ATD15812345678;\r")''', here you can change the phone number you want to dial.		In the code '''Serial.print("ATD15812345678;\r")''', here you can change the phone number you want to dial.<br>
	<br>
	<br>		<br>
	'''Test Result'''<br>		'''Test Result'''<br>

Keyestudio: /* 1) For default serial ports RXD(D0) and TXD(D1):call up */

2019-05-15T08:03:02Z

1) For default serial ports RXD(D0) and TXD(D1):call up

← Older revision		Revision as of 08:03, 15 May 2019
Line 71:		Line 71:
	</pre>		</pre>
	<br>		<br>
	<span style="color: red">''' Code to Note:''' ~~</span >~~<br>		<span style="color: red">''' Code to Note:'''<br>
	In the code '''Serial.print("ATD15812345678;\r")''', here you can change the phone number you want to dial.		In the code '''Serial.print("ATD15812345678;\r")''', here you can change the phone number you want to dial.
	<br>		<br>

Keyestudio: /* 3)For adding serial ports RXD(D6) and TXD(D7): call up */

2019-05-15T08:02:19Z

3)For adding serial ports RXD(D6) and TXD(D7): call up

← Older revision		Revision as of 08:02, 15 May 2019
Line 171:		Line 171:

	<br>		<br>
	<span style="color: red">''' Code to Note:'''~~</span>~~ <br>		<span style="color: red">''' Code to Note:''' <br>
	'''1.'''In the code, it will use the library '''SoftwareSerial.h''', you don't need to add it because the software IDE comes with this library. <br>		'''1.'''In the code, it will use the library '''SoftwareSerial.h''', you don't need to add it because the software IDE comes with this library. <br>
	'''2.'''In the code '''SIM900.println("ATD15812345678;")''', you can change the phone number you want to dial.		'''2.'''In the code '''SIM900.println("ATD15812345678;")''', you can change the phone number you want to dial.

Keyestudio: /* 2) For adding serial ports RXD(D6) and TXD(D7): send text */

2019-05-15T08:02:03Z

2) For adding serial ports RXD(D6) and TXD(D7): send text

← Older revision		Revision as of 08:02, 15 May 2019
Line 119:		Line 119:
	</pre>		</pre>
	<br>		<br>
	<span style="color: red">''' Code to Note:'''~~</span>~~ <br>		<span style="color: red">''' Code to Note:''' <br>
	'''1.''' In the code, it will use the library '''SoftwareSerial.h''', you don't need to add it because the software IDE comes with this library.<br>		'''1.''' In the code, it will use the library '''SoftwareSerial.h''', you don't need to add it because the software IDE comes with this library.<br>
	'''2.''' In the code '''SIM900.println("ATD15812345678;")''', you can change the phone number you want to dial.		'''2.''' In the code '''SIM900.println("ATD15812345678;")''', you can change the phone number you want to dial.

	<br>		<br>

Keyestudio: /* Get One Now */

2019-04-16T03:30:37Z

Get One Now

← Older revision		Revision as of 03:30, 16 April 2019
Line 202:		Line 202:

	==Get One Now ==		==Get One Now ==
	*'''Official Website:''' http://www.keyestudio.com/ks0142.html

	*[https://www.aliexpress.com/store/product/Free-shipping-KEYES-SIM900-GSM-GPRS-module-shields-for-Arduino-wireless-module-with-extension-wire/1452162_32351050132.html?spm=2114.12010612.8148356.8.3a76276fERier0 '''Shop on Aliexpress''']		*[https://www.aliexpress.com/store/product/Free-shipping-KEYES-SIM900-GSM-GPRS-module-shields-for-Arduino-wireless-module-with-extension-wire/1452162_32351050132.html?spm=2114.12010612.8148356.8.3a76276fERier0 '''Shop on Aliexpress''']