Ks0115 keyestudio EASY plug Digital Tilt Sensor Module

EASY plug Digital Tilt Sensor Module

Introduction

Tilt Sensor is a digital tilt switch. It can be used as a simple tilt sensor. Simply plug it to our IO/Sensor shield; you can make amazing interactive projects. With dedicated sensor shield and Arduino, you can achieve interesting and interactive work.
Note: this module needs to be used together with EASY plug control board.

Specification

• Interface: Easy plug
• Supply Voltage: 3.3V to 5V
• Sensor type: Digital
• Size: 39*20mm
• Weight: 5g

Connection Diagram

Sample Code

int ledPin = 13;                // Connect LED to pin 13
int switcher = 10;                 // Connect Tilt sensor to Pin10
void setup()
{
 pinMode(ledPin, OUTPUT);      // Set digital pin 13 to output mode
 pinMode(switcher, INPUT);       // Set digital pin 10 to input mode
}
void loop()
{
   
  if(digitalRead(switcher)==HIGH) //Read sensor value
    {
       digitalWrite(ledPin, HIGH);   // Turn on LED when the sensor is tilted
    }
  else
    {
       digitalWrite(ledPin, LOW);    // Turn off LED when the sensor is not triggered
    }
}

Resources

PDF

https://drive.google.com/open?id=11zcE-Avm45q59CnFpU486L5WpoqgaPB9

Buy from

Official Website

http://www.keyestudio.com/keyestudio-easy-plug-digital-tilt-sensor-module-for-arduino-starter.html