Ks0126 keyestudio EASY plug IR Transmitter Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
==EASY plug IR Transmitter Module==
[[image:ks0125图.jpg|thumb|600px|right|EASY plug IR transmitter Module]]
<br>[[File:ks0126-1.png|500px|frameless|thumb]]<br>


==Introduction==
==Introduction==
Infrared transmitting tube, also known as infrared emitting diode, belongs to the diode family. It is a light-emitting device that can directly convert electrical energy to near-infrared light and emit. Its structure and principle is similar to an LED. Only material of semiconductor is different. This module is usually used together with IR receiver module. <br>
An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light). <br>
Note: this module needs to be used together with EASY plug control board.<br>
In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving device detects the light with a photo diode and converts it to an electrical signal via an integrated circuit, thus control its actions. <br>
 
Infrared transmitters are widely used as a means of wireless communication by remote controls for televisions and other electronic devices.
This IR transmitter module is designed for IR communication when paired with IR receiver module. 
<span style="color: red">'''Note: ''' this module should be used together with EASY plug control board.
<br>


==Specification==
==Specification==
* Interface: Easy plug
*Power Supply: 3-5V
* Power Supply: 3-5V
*Infrared light wavelength: 940mm
* Infrared center frequency: 850nm-940nm
*Infrared emitting angle: about 20 degrees
* Infrared emission angle: about 20degree
*Infrared emitting distance: about 1.3m  
* Infrared emission distance: about 1.3m (5V 38Khz)
*Modulate Frequency: 38Khz
* Interface socket: JST PH2.0
*Comes with a mounting hole
* Mounting hole: inner diameter is 3.2mm, spacing is 15mm
*High quality connector
* Size: 43.8*20mm
* Weight: 5g


<br>
==Technical Details==
* Dimensions: 44mm*20mm*18mm
* Weight: 4.5g


==Connection Diagram ==
<br>
<br>[[File:ks0126-2.png|500px|frameless|thumb]]<br>
==Connect It Up ==
Connect the EASY Plug Infrared transmitter sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
<br>[[File:ks0125.jpg|500px|frameless|thumb]]<br>


 
<br>
==Sample Code==
==Upload the Code==
Copy and paste below code to [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE] and upload.
<pre>
<pre>
#include <IRremote.h>
#include <IRremote.h>
Line 35: Line 42:
delay(100);
delay(100);
}
}
</pre>
</pre>


'''Download the libraries of IRremote:''' [http://www.keyestudio.com/files/index/download/id/1507704070/]
<br>


==Resources ==
==Resources ==
'''Download the PDF:'''<br>
https://drive.google.com/open?id=1UkrRZFxKu2A4CUS_Ug_-hyh4U4c77B2m


'''PDF'''
'''Download the libraries:''' <br>
 
https://drive.google.com/open?id=1CEZEdIN_apPnQ69adX4lVsyWosXM0GGa
https://drive.google.com/open?id=1UkrRZFxKu2A4CUS_Ug_-hyh4U4c77B2m


'''Libraries'''
'''Download the code:''' <br>
https://drive.google.com/open?id=1krXFwgIZFS39wrOVsAhtclTeHnsjLLoa


https://drive.google.com/open?id=1BO7P-o_OBoNzO2CLI4YiMHB-jRMrPgDI
<br>


==Buy from ==
==Buy from ==
'''Official Website'''
*'''Official Website:''' http://www.keyestudio.com/ks0126.html


http://www.keyestudio.com/keyestudio-easy-plug-ir-transmitter-module-for-arduino-starter.html


[[category:EASY Plug]]
[[category:EASY Plug]]

Revision as of 15:02, 27 November 2018

EASY plug IR transmitter Module

Introduction

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light).
In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving device detects the light with a photo diode and converts it to an electrical signal via an integrated circuit, thus control its actions.
Infrared transmitters are widely used as a means of wireless communication by remote controls for televisions and other electronic devices. This IR transmitter module is designed for IR communication when paired with IR receiver module.  Note: this module should be used together with EASY plug control board.

Specification

  • Power Supply: 3-5V
  • Infrared light wavelength: 940mm
  • Infrared emitting angle: about 20 degrees
  • Infrared emitting distance: about 1.3m
  • Modulate Frequency: 38Khz
  • Comes with a mounting hole
  • High quality connector


Technical Details

  • Dimensions: 44mm*20mm*18mm
  • Weight: 4.5g


Connect It Up

Connect the EASY Plug Infrared transmitter sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb


Upload the Code

Copy and paste below code to Arduino IDE and upload. 

#include <IRremote.h>
IRsend irsend;
void setup()
{
Serial.begin(9600);
}
void loop() {
irsend.sendSony(0xa90, 12); // Sony TV power code
delay(100);
}


Resources

Download the PDF:
https://drive.google.com/open?id=1UkrRZFxKu2A4CUS_Ug_-hyh4U4c77B2m

Download the libraries:
https://drive.google.com/open?id=1CEZEdIN_apPnQ69adX4lVsyWosXM0GGa

Download the code:
https://drive.google.com/open?id=1krXFwgIZFS39wrOVsAhtclTeHnsjLLoa


Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0126_keyestudio_EASY_plug_IR_Transmitter_Module&oldid=13153"