Ks0229 keyestudio EASY plug Digital Green LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
==EASY plug Digital Green LED Module==
[[image:KS0101图.jpg|thumb|600px|right|Keyestudio EASY plug Digital Green LED Module]]
<br>[[File:KS0228-1.png|500px|frameless|thumb]]<br>


<br>
==Introduction==
==Introduction==
This LED module emits shiny green light, ideal for Arduino starters. It can be easily connected to IO/Sensor shield.
The LED light module has a shiny color, ideal for emitting green light. It can be easily connected to Arduino IO/Sensor shield.<br>
Note: this module needs to be used together with EASY plug control board. You can also choose other LED to emit different color of light like blue, red, yellow and white.<br>
<span style="color: red">'''Note: ''' </span> this module needs to be used together with EASY plug control board.You can also choose other LED modules to emit different light color like blue, green, yellow and white.<br>


<br>
==Specification==
==Specification==
* Interface: Easy plug
* Interface: Easy plug
* Sensor Type: Digital
* Sensor type: Digital
* PH2.54 socket
* PH2.54 socket
* Enables interaction with light-related works
* Easy to use
* Size: 33.7*20mm
* Useful for light projects
* Weight: 5g


==Connection Diagram ==
<br>
<br>[[File:KS0228-2.png|500px|frameless|thumb]]<br>
== Connect It Up ==
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
<br>[[File:Ks0228.jpg|600px|frameless|thumb]]<br>
<br>


==Sample Code==
==Sample Code==
Copy and paste below code to [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE] and upload.
<pre>
<pre>
int led = 9;
int led =6;
void setup()
void setup()
{
{
pinMode(led, OUTPUT);     //Set Pin9 as output
pinMode(led, OUTPUT);//Set Pin6 as output
}
}
void loop()
void loop()
{
{
        digitalWrite(led, HIGH);   //Turn on led
digitalWrite(led, HIGH);//Turn led on
        delay(2000);
delay(2000);
        digitalWrite(led, LOW);   //Turn off led
digitalWrite(led, LOW);//Turn led off
        delay(2000);
delay(2000);
}
}
</pre>
</pre>


<br>
==What You Should See==
The LED will flash on for two seconds, then off for two seconds. If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
<br>[[File:Ks0228 red.png|600px|frameless|thumb]]<br>
<br>
==Resources ==
==Resources ==


'''PDF'''
'''Download the PDF:'''<br>
https://drive.google.com/open?id=1FcoeYNpAbLmZMNY_LEqy6tQnWlBLxTxt


https://drive.google.com/open?id=1nPsN7XYPcfNdOvvuaP-bf5p8FjBJKBJE
<br>


==Buy from ==
==Buy from ==
'''Official Website'''
*'''Official Website:''' http://www.keyestudio.com/ks0229.html
 


http://www.keyestudio.com/easy-plug-digital-green-led-module.html


[[category:EASY Plug]]
[[category: EASY Plug]]

Revision as of 09:37, 28 November 2018

Keyestudio EASY plug Digital Green LED Module


Introduction

The LED light module has a shiny color, ideal for emitting green light. It can be easily connected to Arduino IO/Sensor shield.
Note: this module needs to be used together with EASY plug control board.You can also choose other LED modules to emit different light color like blue, green, yellow and white.


Specification

  • Interface: Easy plug
  • Sensor type: Digital
  • PH2.54 socket
  • Easy to use
  • Useful for light projects


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb

Sample Code

Copy and paste below code to Arduino IDE and upload. 

int led =6;
void setup()
{
pinMode(led, OUTPUT);//Set Pin6 as output
}
void loop()
{
digitalWrite(led, HIGH);//Turn led on
delay(2000);
digitalWrite(led, LOW);//Turn led off
delay(2000);
}


What You Should See

The LED will flash on for two seconds, then off for two seconds. If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
thumb


Resources

Download the PDF:
https://drive.google.com/open?id=1FcoeYNpAbLmZMNY_LEqy6tQnWlBLxTxt


Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0229_keyestudio_EASY_plug_Digital_Green_LED_Module&oldid=13231"