Ks0135 keyestudio EASY plug Bluetooth Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[image:ks0136图.jpg|thumb|600px|right|EASY plug Bluetooth 2.0 Module]]
[[image:Ks0135-.png|thumb|600px|right|EASY plug Bluetooth 2.0 Module]]


==Introduction==
==Introduction==
Line 30: Line 30:
==Connect It Up ==
==Connect It Up ==
Connect the EASY Plug Bluetooth module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br>
Connect the EASY Plug Bluetooth module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br>
<br>[[File:ks0136.jpg|500px|frameless|thumb]]<br>
<br>[[File:Ks0135-3.png|700px|frameless|thumb]]<br>


<br>
<br>
Line 60: Line 60:
==What You Should See==
==What You Should See==
Done uploading the test code, powered on, power indicator is turned on, and LED on Bluetooth module is blinking.
Done uploading the test code, powered on, power indicator is turned on, and LED on Bluetooth module is blinking.
<br>[[File:ks0136 Result.png|600px|frameless|thumb]]<br>
<br>[[File:Ks0135-4.png|600px|frameless|thumb]]<br>


Then open Bluetooth on your mobile phone, pair Bluetooth device, input 1234, and you should see the paired device.  
Then open Bluetooth on your mobile phone, pair Bluetooth device, input 1234, and you should see the paired device.  
<br>[[File:ks0136 Result.png|600px|frameless|thumb]]<br>
<br>[[File:Ks0313-7(16.png|600px|frameless|thumb]]<br>


After that, open an Bluetooth serial communication assistant - BTClient. <br>
After that, open an Bluetooth serial communication assistant - BTClient. <br>
You can download the Andriod APP here: https://drive.google.com/open?id=1RM6wJCVlOMAWziZQR4YbZHPQyAV0xetJ  <br>
You can download the Andriod APP here: https://drive.google.com/open?id=1RM6wJCVlOMAWziZQR4YbZHPQyAV0xetJ  <br>
Search for device, then select your Bluetooth device. <br>
Search for device, then select your Bluetooth device. <br>
<br>[[File:ks0136 Result.png|600px|frameless|thumb]] [[File:ks0136 Result.png|600px|frameless|thumb]]<br>
<br>[[File:Ks0135-5.png|600px|frameless|thumb]] [[File:Ks0135-6.png|600px|frameless|thumb]]<br>


Done connected, when send an “a” , it will display “keyesdudio”.
Done connected, when send an “a” , it will display “keyesdudio”.
<br>[[File:ks0136 Result.png|600px|frameless|thumb]]<br>
<br>[[File:Ks0313-7(17.png|600px|frameless|thumb]]<br>


<br>
<br>
==Resources ==
==Resources ==
'''Download the PDF:'''<br>
'''Download the PDF:'''<br>
https://drive.google.com/open?id=125AIxiiFbZyZKVGqTLOf9aX3tjWOrY0q
https://drive.google.com/open?id=1Mr_r2QrY43AbX_7-N4BhA-3FyjT9b3Zu


'''Download the libraries:'''<br>
'''Download the Android APP:'''<br>
https://drive.google.com/open?id=1SYoX5AAvJDtHVJ42gBPRUUu2arq2M9Vo
https://drive.google.com/open?id=1-hAs0EuKjdde5damUvTonjoq7Gknd8uf


'''Download the code:'''<br>
'''Download the code:'''<br>
https://drive.google.com/open?id=1QEe6-ecuSw6IRG1wiK5lbx7HPyvB8QDU
https://drive.google.com/open?id=1aGULLoiQDT7RABu2g25gvcaInyRzv54p





Revision as of 10:47, 28 November 2018

EASY plug Bluetooth 2.0 Module

Introduction

Keyestudio Bluetooth 2.0 module can easily achieve serial wireless data transmission. The operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical).
It adopts Bluetooth 2.1+EDR standard. In Bluetooth 2.1, signal transmit time of different devices stands at a 0.5 seconds interval, so that the workload of Bluetooth chip can be reduced substantially and more sleeping time can be saved for Bluetooth.
It has build-in on-board antenna which provides high quality signals. 
Note: this module should be used together with EASY plug control board.


Specification

  • Bluetooth protocol: Bluetooth 2.1+ EDR standard
  • USB protocol: USB v1.1/2.0
  • Operating frequency: 2.4GHz ISM frequency band
  • Modulation mode: GFSK (Gauss Frequency Shift Keying)
  • Transmit power: ≤ 4dBm, class 2
  • Sensitivity: ≤-84dBm at 0.1% Bit Error Rate
  • Transfer rate: Asynchronous: 2.1Mbps(Max)/160kbps ; Synchronous: 1Mbps/1Mbps
  • Safety feature: Authentication and encryption
  • Supported configuration: Bluetooth serial port
  • Supply Voltage: 5V DC /50mA
  • Operating temperature: -20℃ to +55℃


Technical Details

  • Dimensions: 52mm*16mm*18mm
  • Weight: 5.3g


Connect It Up

Connect the EASY Plug Bluetooth module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

thumb


Upload the Code

Copy and paste below code to Arduino IDE and upload.
Firstly should upload the code to control board, then connect the Bluetooth module. Otherwise, it will fail to upload the program.

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("keyestudio");
}}


What You Should See

Done uploading the test code, powered on, power indicator is turned on, and LED on Bluetooth module is blinking.
thumb

Then open Bluetooth on your mobile phone, pair Bluetooth device, input 1234, and you should see the paired device.
thumb

After that, open an Bluetooth serial communication assistant - BTClient.
You can download the Andriod APP here: https://drive.google.com/open?id=1RM6wJCVlOMAWziZQR4YbZHPQyAV0xetJ
Search for device, then select your Bluetooth device.

thumb thumb

Done connected, when send an “a” , it will display “keyesdudio”.
thumb


Resources

Download the PDF:
https://drive.google.com/open?id=1Mr_r2QrY43AbX_7-N4BhA-3FyjT9b3Zu

Download the Android APP:
https://drive.google.com/open?id=1-hAs0EuKjdde5damUvTonjoq7Gknd8uf

Download the code:
https://drive.google.com/open?id=1aGULLoiQDT7RABu2g25gvcaInyRzv54p



Buy from