Ks0131 keyestudio EASY plug Analog Gas Sensor: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 16: Line 16:
* Stable and long lifespan
* Stable and long lifespan
* Quick response and High sensitivity
* Quick response and High sensitivity
<br>
<br>
==Technical Details==
==Technical Details==
* Dimensions: 56mm*20mm*18mm
* Dimensions: 56mm*20mm*18mm
Line 29: Line 29:
<br>
<br>
==Upload the Code==
==Upload the Code==
Copy and paste below code to [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE] and upload.  
Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly  Mixly Blocks] and upload. <br>
<pre>
<br>[[File:ks0398 18.1.png|500px|frameless|thumb]]<br>
int gas_din=2;
int gas_ain=A7;
int led=13;
int ad_value;
void setup()
{
  pinMode(led,OUTPUT);
  pinMode(gas_din,INPUT);
  pinMode(gas_ain,INPUT);
  Serial.begin(9600);
}
void loop()
{
  ad_value=analogRead(gas_ain);
  if(digitalRead(gas_din)==LOW)
  {
    digitalWrite(led,HIGH);
    Serial.println("Gas leakage");
    Serial.println(ad_value);
  }
  else
  {
    digitalWrite(led,LOW);
Serial.println("Gas not leak");
Serial.println(ad_value);
  }
  delay(500);
}
</pre>


<br>
<br>
==What You Should See==
==What You Should See==
Done uploading the test code, open the serial monitor and set the baud rate to 9600, you should be able to see the “Gas not leak” and analog value.
<br>[[File:ks0398 18-1.png|500px|frameless|thumb]]<br>
<br>[[File:ks0131 Result.png|600px|frameless|thumb]]  [[File:ks0131 Result1.png|600px|frameless|thumb]]<br>
<br>
Done uploading the test code, open the serial monitor and set the baud rate to 9600, you should be able to see the analog value.
<br>[[File:ks0398 18-2.png|500px|frameless|thumb]]<br>
<br>[[File:ks0131 Result.png|600px|frameless|thumb]]
 
<br>
==Adding OLED Display==
<br>
If you want to display the gas analog value more convenient, you can add OLED screen.
<br>
'''Hookup Guide'''<br>
<br>[[File:OLED气体.jpg|500px|frameless|thumb]]<br>
 
<br>
'''Test Code'''<br>
<br>[[File:ks0398 18.1.png|500px|frameless|thumb]]<br>


<br>
<br>
'''What You Should See'''<br>
Upload success, you should be able to see the analog value is showed on the OLED screen. 
<br>[[File:ks0398 18-3.png|500px|frameless|thumb]]<br>


<br>
<br>
==Resources ==
==Resources ==
'''Download the PDF:'''<br>
'''Download the Arduino information here:'''<br>
https://drive.google.com/open?id=1pyThscSF3TAERFTrTj7xfPnUuO15KSsR
https://drive.google.com/open?id=1rlH4_QHex1jX4bB1YiifLejcR7eA2Yfg
 
'''Download the Mixly information here:'''<br>
https://drive.google.com/open?id=1QRScLM_RFtBljzq5n88QpIZZqtaV8zqM


'''Download the Code:'''<br>
https://drive.google.com/open?id=1ZyuI9kgD-cFl9uK3tMqLUqj-ZIvEQqc8


<br>
<br>
==Buy from ==
==Buy from ==
*'''Official Website:''' http://www.keyestudio.com/ks0131.html
*[https://www.keyestudio.com/newkeyestudio-easy-plug-analog-gas-sensor-mq-2-for-arduino-starter-steam-p0103.html '''Official Website''' ]


*[https://www.aliexpress.com/store/product/NEW-Keyestudio-EASY-plug-Analog-Gas-Sensor-MQ-2-for-arduino-starter/1452162_32647755242.html?spm=2114.12010612.8148356.54.60624ba73cp1Lj  Shop on aliexpress ]
*[https://www.aliexpress.com/store/product/NEW-Keyestudio-EASY-plug-Analog-Gas-Sensor-MQ-2-for-arduino-starter/1452162_32647755242.html?spm=2114.12010612.8148356.54.60624ba73cp1Lj  Shop on aliexpress ]


[[category:EASY Plug]]
[[category:EASY Plug]]

Revision as of 14:25, 7 May 2019

EASY plug Analog Gas Sensor

Introduction

This analog gas sensor - MQ2 is used in gas leakage detecting equipment in consumer electronics and industrial markets.
This sensor is suitable for detecting LPG, I-butane, propane, methane, alcohol, Hydrogen and smoke. It has high sensitivity and quick response.
In addition, the sensitivity can be adjusted by the potentiometer.
Note: this module should be used together with EASY plug control board.


Features

  • Connector: Easy plug
  • Power supply: 5V
  • Interface type: Digital and Analog
  • Wide detecting scope
  • Simple drive circuit
  • Stable and long lifespan
  • Quick response and High sensitivity


Technical Details

  • Dimensions: 56mm*20mm*18mm
  • Weight: 9g


Connect It Up

Connect the EASY Plug analog gas sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb


Upload the Code

Below is an example code. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See


thumb

Done uploading the test code, open the serial monitor and set the baud rate to 9600, you should be able to see the analog value.
thumb

thumb


Adding OLED Display


If you want to display the gas analog value more convenient, you can add OLED screen.
Hookup Guide

thumb


Test Code

thumb


What You Should See
Upload success, you should be able to see the analog value is showed on the OLED screen.
thumb



Resources

Download the Arduino information here:
https://drive.google.com/open?id=1rlH4_QHex1jX4bB1YiifLejcR7eA2Yfg

Download the Mixly information here:
https://drive.google.com/open?id=1QRScLM_RFtBljzq5n88QpIZZqtaV8zqM



Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0131_keyestudio_EASY_plug_Analog_Gas_Sensor&oldid=17302"