Ks0227 keyestudio EASY plug Blue LED Module: Difference between revisions
Keyestudio (talk | contribs) (Created page with "==Introduction== This is a special EASY plug blue LED module. When connecting to ARDUINO, after programming, it can emit blue light. For easy use, the module’s 3pin are bro...") |
Keyestudio (talk | contribs) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Introduction== | |||
This is a special EASY plug blue LED module. When connecting to ARDUINO, after programming, it can emit blue light. | |||
[[image:Ks0227-1.png|thumb|300px|right|Keyestudio EASY plug Blue LED Module]] | |||
<br> | |||
== Introduction == | |||
This is a special EASY plug blue LED module. When connecting to ARDUINO, after programming, it can emit blue light. <br> | |||
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 | For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 | ||
You should connect the LED module to control board for communication using an RJ11 cable. | You should connect the LED module to control board for communication using an RJ11 cable.<br> | ||
You can combine with other sensors to do various interactive experiments. | You can combine with other sensors to do various interactive experiments. | ||
You can also choose other LED modules to emit different light color like yellow, red, green and white. | |||
<span style=color:red> '''Special Note:''' <br> | |||
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br> | |||
<br> | |||
You | == Features == | ||
* Interface: Easy plug | |||
* Sensor type: Digital | |||
* Working voltage: 5V | |||
* LED color: blue | |||
* Easy to use | |||
* Useful for light projects | |||
<br> | |||
== Technical Details == | |||
* Dimensions: 34mm*20mm*18mm | |||
* Weight: 3.8g | |||
<br> | |||
== Connect It Up == | |||
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br> | |||
<br>[[File:Ks0227.png|500px|frameless|thumb]]<br> | |||
<br> | |||
== Upload the Code == | |||
Below is an example code for LED blinking. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly Mixly Blocks] and upload. <br> | |||
<br>[[File:Ks0227-图片1-.png|500px|frameless|thumb]]<br> | |||
<br> | |||
==What You Should See== | |||
<br>[[File:Ks0227-图片2-.png|500px|frameless|thumb]]<br> | |||
<br> | |||
The LED will flash on for one second, then blink off for one second. <br> | |||
<br>[[File:0397 Result2-3.png|500px|frameless|thumb]]<br> | |||
<br> | |||
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.<br> | |||
<br> | |||
<span style="color: red">'''Little Knowledge:'''</span> <br> | |||
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.<br> | |||
<br>[[File:Ks0227-图片3.png|500px|frameless|thumb]]<br> | |||
<br> | |||
==Resources == | |||
https://fs.keyestudio.com/KS0227 | |||
<br> | |||
==Buy from == | |||
*[https://www.keyestudio.com/keyestudio-rj11-easy-plug-led-moduleblue-for-arduino-stem-p0320-p0320.html '''Official Website''' ] | |||
*[https://www.aliexpress.com/store/product/Keyestudio-EASY-plug-Blue-Piranha-LED-Module-for-Arduino/1452162_32812349620.html?spm=2114.12010612.8148356.37.a5a85129a32N4z '''aliexpress store'''] | |||
[[category: EASY Plug]] | |||
Latest revision as of 08:29, 8 January 2021
Introduction
This is a special EASY plug blue LED module. When connecting to ARDUINO, after programming, it can emit blue light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like yellow, red, green and white.
Special Note:
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module.
Features
- Interface: Easy plug
- Sensor type: Digital
- Working voltage: 5V
- LED color: blue
- Easy to use
- Useful for light projects
Technical Details
- Dimensions: 34mm*20mm*18mm
- Weight: 3.8g
Connect It Up
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
Upload the Code
Below is an example code for LED blinking. Open or drag below code to Mixly Blocks and upload.
What You Should See
The LED will flash on for one second, then blink off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
Little Knowledge:
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.
Resources
https://fs.keyestudio.com/KS0227