Ks0422 keyestudio micro:bit PIR Motion Module: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 42: | Line 42: | ||
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. | When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. | ||
Or else, it will show another image and led turns off. | Or else, it will show another image and led turns off. | ||
<br>[[File: | <br>[[File:0422图片1.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
==Resources == | ==Resources == | ||
Download | |||
https:// | *'''Download relevant datasheet and code: | ||
''' https://fs.keyestudio.com/KS0422''' | |||
* [http://microbit.org/ BBC micro:bit website ] <br> | |||
* [https://makecode.microbit.org/ Micro:bit MakeCode Block Editor ]<br> | |||
* [http://microbit.org/guide/ Meet micro:bit starter programming] <br> | |||
* [http://microbit.org/guide/features/ BBC micro:bit Features Guide ] <br> | |||
* [http://microbit.org/guide/features/ BBC micro:bit Safety Warnings ] <br> | |||
* [http://microbit.org/guide/quick/ BBC micro:bit Quick Start Guide ] <br> | |||
* [http://microbit.org/guide/hardware/pins/ BBC micro:bit Pins ] | |||
<br> | <br> | ||
==Get One Now== | |||
*[https://www.aliexpress.com/store/product/keyestudio-PIR-Motion-Sensor-Module-For-BBC-micro-bit/1452162_32997053565.html?spm=2114.12010611.8148356.13.3f896c0eHzY5BG Shop on aliexpress ] | |||
*[https://www.keyestudio.com/keyestudio-pir-motion-sensor-module-for-bbc-microbit-p0537-p0537.html Official website] | |||
[[Category: Micro:bit]] | [[Category: Micro:bit]] | ||
Latest revision as of 11:08, 1 March 2021
Description
This keyestudio PIR motion module is fully compatible with micro:bit control board.
It is mainly composed of a digital pyroelectric infrared sensor, which is a digital signal output device.
This sensor has built-in filters, strong anti-interference, low voltage and micro power consumption.
The detection distance of the module is 3-5 meters.
The detection angle in the horizontal direction is less than 80°; the detection angle in the vertical direction is less than 55°
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are separately connected. G for ground; V for 3V; S for signal pin(0 1 2).
When using, connect the module to micro:bit control board using Crocodile clip line.
Once detecting someone moving nearby, the signal pin of micro:bit main board will input HIGH level; LED on the module lights.
Technical Parameters
- Working voltage: DC 3.0-3.3V
- Working current: 100mA
- Maximum power: 0.5W
- Output signal: digital signal
- Detection distance: 3-5 meters
- Detection angle: less than 80°in the horizontal direction and less than 55° in the vertical direction
- Operating temperature range: -30℃~ +80℃
- Dimensions: 31mm*27mm*6mm
- Weight: 2g
- Environmental attributes: ROHS
Connection Diagram
Source Code
Example Result
Connect well the module, then send the source code to the micro:bit main board.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights.
Or else, it will show another image and led turns off.
Resources
- Download relevant datasheet and code:
https://fs.keyestudio.com/KS0422
- BBC micro:bit website
- Micro:bit MakeCode Block Editor
- Meet micro:bit starter programming
- BBC micro:bit Features Guide
- BBC micro:bit Safety Warnings
- BBC micro:bit Quick Start Guide
- BBC micro:bit Pins