Ks0422 keyestudio micro:bit PIR Motion Module: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 42: | Line 42: | ||
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. | When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. | ||
Or else, it will show another image and led turns off. | Or else, it will show another image and led turns off. | ||
<br>[[File: | <br>[[File:0422图片1.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
| Line 48: | Line 48: | ||
==Resources == | ==Resources == | ||
*'''Download relevant datasheet and code:''' https:// | *'''Download relevant datasheet and code: | ||
''' https://fs.keyestudio.com/KS0422''' | |||
* [http://microbit.org/ BBC micro:bit website ] <br> | * [http://microbit.org/ BBC micro:bit website ] <br> | ||
Latest revision as of 11:08, 1 March 2021
Description
This keyestudio PIR motion module is fully compatible with micro:bit control board.
It is mainly composed of a digital pyroelectric infrared sensor, which is a digital signal output device.
This sensor has built-in filters, strong anti-interference, low voltage and micro power consumption.
The detection distance of the module is 3-5 meters.
The detection angle in the horizontal direction is less than 80°; the detection angle in the vertical direction is less than 55°
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are separately connected. G for ground; V for 3V; S for signal pin(0 1 2).
When using, connect the module to micro:bit control board using Crocodile clip line.
Once detecting someone moving nearby, the signal pin of micro:bit main board will input HIGH level; LED on the module lights.
Technical Parameters
- Working voltage: DC 3.0-3.3V
- Working current: 100mA
- Maximum power: 0.5W
- Output signal: digital signal
- Detection distance: 3-5 meters
- Detection angle: less than 80°in the horizontal direction and less than 55° in the vertical direction
- Operating temperature range: -30℃~ +80℃
- Dimensions: 31mm*27mm*6mm
- Weight: 2g
- Environmental attributes: ROHS
Connection Diagram
Source Code
Example Result
Connect well the module, then send the source code to the micro:bit main board.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights.
Or else, it will show another image and led turns off.
Resources
- Download relevant datasheet and code:
https://fs.keyestudio.com/KS0422
- BBC micro:bit website
- Micro:bit MakeCode Block Editor
- Meet micro:bit starter programming
- BBC micro:bit Features Guide
- BBC micro:bit Safety Warnings
- BBC micro:bit Quick Start Guide
- BBC micro:bit Pins